substitutions:
  name: tx-ultimate
  friendly_name: TX Ultimate

  led_pin: GPIO13
  status_led_pin: GPIO33

  audio_sdata_pin: GPIO15

api:

binary_sensor:
  - id: bs_vibrating
    name: Vibrating
    icon: mdi:vibrate
    internal: false
    platform: template
    lambda: return sw_vibration_motor->state;

# bluetooth_proxy:

button:
  - id: bt_restart
    name: Restart
    internal: false
    platform: restart

  - id: bt_vibrate
    name: Vibrate
    icon: mdi:vibrate
    internal: false
    platform: template
    on_press: 
      then:
        - switch.turn_on: sw_vibration_motor
        - delay: !lambda return nr_vibrating_duration->state;
        - switch.turn_off: sw_vibration_motor

captive_portal:

esp32:
  board: esp32dev
  framework:
    type: esp-idf
    sdkconfig_options:
      CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST: "y"
      CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY: "y"
      CONFIG_ESP32_REV_MIN_3: "y"
      CONFIG_MBEDTLS_DYNAMIC_BUFFER: "y"
      CONFIG_MBEDTLS_DYNAMIC_FREE_CA_CERT: "y"
      CONFIG_MBEDTLS_DYNAMIC_FREE_CONFIG_DATA: "y"
      CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC: "y"
      CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY: "y"
      CONFIG_SPIRAM_RODATA: "y"
      CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP: "y"

esphome:
  name: ${name}
  friendly_name: ${friendly_name}
  on_boot: 
    - priority: 700
      then:
        - wait_until:
            condition:
              - lambda: return sl_tx_model_gang->active_index().has_value();
        - lambda: |-
            auto index = sl_tx_model_gang->active_index();
            if (index.has_value()) {
              sw_relay_1->set_internal(false);
              sw_relay_2->set_internal(index.value() < 1);
              sw_relay_3->set_internal(index.value() < 2);
              sw_relay_4->set_internal(index.value() < 3);
            }

i2s_audio:
  id: if_i2s_audio
  i2s_lrclk_pin: GPIO4
  i2s_bclk_pin: GPIO2

logger:

number:
  - id: nr_vibrating_duration
    name: Vibrate duration
    icon: mdi:vibrate
    unit_of_measurement: ms
    mode: box
    internal: false
    platform: template
    min_value: 10
    max_value: 3000
    step: 1
    initial_value: 50
    optimistic: true
    restore_value: true

ota:

psram:

select:
  - id: sl_tx_model_gang
    name: Model
    platform: template
    options:
      - "1 Gang"
      - "2 Gang"
      - "3 Gang"
      - "4 Gang"
    initial_option: "1 Gang"
    optimistic: true
    restore_value: true
    internal: false
    entity_category: config
    disabled_by_default: false
    icon: mdi:dip-switch

switch:
  - id: sw_pa_power
    name: PA - Power
    platform: gpio
    pin: GPIO26
    restore_mode: ALWAYS_ON
    internal: true

  - id: sw_relay_1
    name: Relay 1
    platform: gpio
    pin: GPIO18
    restore_mode: RESTORE_DEFAULT_OFF
    internal: false

  - id: sw_relay_2
    name: Relay 2
    platform: gpio
    pin: GPIO17
    restore_mode: RESTORE_DEFAULT_OFF
    internal: true

  - id: sw_relay_3
    name: Relay 3
    platform: gpio
    pin: GPIO27
    restore_mode: RESTORE_DEFAULT_OFF
    internal: true

  - id: sw_relay_4
    name: Relay 4
    platform: gpio
    pin: GPIO23
    restore_mode: RESTORE_DEFAULT_OFF
    internal: true

  - id: sw_touch_panel_power
    name: Touch panel - Power
    platform: gpio
    pin:
      number: GPIO5
      inverted: true
    restore_mode: ALWAYS_ON
    internal: true

  - id: sw_vibration_motor
    name: Vibration motor
    platform: gpio
    pin: GPIO21
    restore_mode: ALWAYS_OFF
    internal: true
    on_turn_on:
      then:
        - lambda: bs_vibrating->publish_state(true);
    on_turn_off:
      then:
        - lambda: bs_vibrating->publish_state(false);

uart:
  id: if_uart_touch
  tx_pin: GPIO19
  rx_pin: GPIO22
  baud_rate: 115200
  debug:
    direction: BOTH #RX
    dummy_receiver: false
    after:
      timeout: 2s
      bytes: 2048
    sequence:
      #- lambda: UARTDebug::log_string(direction, bytes);
      - lambda: UARTDebug::log_hex(direction, bytes, ' ');

wifi:
  ap: