Bump version to 2025.1.3 [skip-versioning]

Fix `name 'CORE' is not defined`

.github/workflows/validate_esphome_beta.yml

@@ -8,10 +8,22 @@ permissions:
 on:  # yamllint disable-line rule:truthy
   push:
     paths:
-      - "**/*.{yml,yaml,h,cpp,c,py}"  # Match any file with the extensions in any directory
+      - "**/*.yml"
+      - "**/*.yaml"
+      - "**/*.h"
+      - "**/*.cpp"
+      - "**/*.c"
+      - "**/*.py"
+
   pull_request:
     paths:
-      - "**/*.{yml,yaml,h,cpp,c,py}"  # Match any file with the extensions in any directory
+      - "**/*.yml"
+      - "**/*.yaml"
+      - "**/*.h"
+      - "**/*.cpp"
+      - "**/*.c"
+      - "**/*.py"
+
   workflow_dispatch:
 
 concurrency:

.github/workflows/versioning.yml

@@ -4,7 +4,6 @@
 # 2. Manual dispatch - allows independent control over stable and latest tags
 
 ---
-
 name: Version and Tags
 
 on:  # yamllint disable-line rule:truthy
@@ -56,10 +55,9 @@ jobs:
 
       - name: Update stable tag
         if: |
-          success() && (
+          success() &&
-            github.event_name == 'workflow_dispatch' && inputs.update_stable ||
+          github.event_name == 'workflow_dispatch' &&
-            github.event_name == 'push'
+          inputs.update_stable
-          )
         run: |
           # Verify version bump was successful
           if [ ! -f "./versioning/VERSION" ]; then

.test/common.yaml

@@ -0,0 +1,5 @@
+---
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/common_ard.yaml

@@ -0,0 +1,8 @@
+---
+packages:
+  common: !include common.yaml
+
+esp32:
+  framework:
+    type: arduino
+...

.test/common_idf.yaml

@@ -0,0 +1,19 @@
+---
+packages:
+  common: !include common.yaml
+
+esp32:
+  framework:
+    type: esp-idf
+
+light:
+  - id: !extend light_full
+    platform: esp32_rmt_led_strip
+    rgb_order: GRB
+    rmt_channel: 1
+    chipset: ws2812
+    max_refresh_rate: 33ms
+    use_psram: false
+    type: !remove
+    variant: !remove
+...

.test/common_idf53.yaml

@@ -0,0 +1,10 @@
+---
+packages:
+  common_idf: !include common_idf.yaml
+
+esp32:
+  framework:
+    type: esp-idf
+    version: 5.3.1
+    platform_version: 6.9.0
+...

.test/esphome_ard_basic.yaml

@@ -1,13 +1,6 @@
 ---
 packages:
+  common_arduino: !include common_ard.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml
-
-esp32:
-  framework:
-    type: arduino
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_ard_ble_proxy.yaml

@@ -1,14 +1,7 @@
 ---
 packages:
+  common_arduino: !include common_ard.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml
   addon_bluetooth_proxy: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml
-
-esp32:
-  framework:
-    type: arduino
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_ard_core.yaml

@@ -1,12 +1,5 @@
 ---
 packages:
+  common_arduino: !include common_ard.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
-
-esp32:
-  framework:
-    type: arduino
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_ard_hw_relays.yaml

@@ -1,13 +1,6 @@
 ---
 packages:
+  common_arduino: !include common_ard.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_hw_relays_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml
-
-esp32:
-  framework:
-    type: arduino
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_ard_hw_speaker.yaml

@@ -1,13 +1,6 @@
 ---
 packages:
+  common_arduino: !include common_ard.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_hw_speaker_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_speaker.yaml
-
-esp32:
-  framework:
-    type: arduino
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_ard_hw_vibration.yaml

@@ -1,13 +1,6 @@
 ---
 packages:
+  common_arduino: !include common_ard.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_hw_vibration_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml
-
-esp32:
-  framework:
-    type: arduino
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_ard_media_player.yaml

@@ -1,15 +1,8 @@
 ---
 packages:
+  common_arduino: !include common_ard.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_hw_relays_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml
   standard_hw_vibration_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml
   addon_media_player: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_addon_media_player.yaml
-
-esp32:
-  framework:
-    type: arduino
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_idf53_basic.yaml

@@ -1,15 +1,11 @@
 ---
 packages:
+  common_idf53: !include common_idf53.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml
 
-esp32:
+media_player: !remove
-  framework:
-    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
 
-wifi:
+switch:
-  ssid: !secret wifi_ssid
+  - id: !remove sw_speaker_amplifier
-  password: !secret wifi_password
 ...

.test/esphome_idf53_ble_proxy.yaml

@@ -1,5 +1,6 @@
 ---
 packages:
+  common: !include common.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml
   addon_bluetooth_proxy: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml
@@ -9,8 +10,4 @@ esp32:
     type: esp-idf
     version: 5.3.1
     platform_version: 6.9.0
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_idf53_core.yaml

@@ -1,14 +1,5 @@
 ---
 packages:
+  common_idf53: !include common_idf53.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
-
-esp32:
-  framework:
-    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_idf53_hw_relays.yaml

@@ -1,15 +1,6 @@
 ---
 packages:
+  common_idf53: !include common_idf53.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_hw_relays_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml
-
-esp32:
-  framework:
-    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_idf53_hw_speaker.yaml

@@ -1,15 +1,6 @@
 ---
 packages:
+  common_idf53: !include common_idf53.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_hw_speaker_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_speaker.yaml
-
-esp32:
-  framework:
-    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_idf53_hw_vibration.yaml

@@ -1,15 +1,6 @@
 ---
 packages:
+  common_idf53: !include common_idf53.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_hw_vibration_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml
-
-esp32:
-  framework:
-    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_idf_basic.yaml

@@ -1,13 +1,11 @@
 ---
 packages:
+  common_idf: !include common_idf.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml
 
-esp32:
+media_player: !remove
-  framework:
-    type: esp-idf
 
-wifi:
+switch:
-  ssid: !secret wifi_ssid
+  - id: !remove sw_speaker_amplifier
-  password: !secret wifi_password
 ...

.test/esphome_idf_ble_proxy.yaml

@@ -1,14 +1,7 @@
 ---
 packages:
+  common: !include common.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml
   addon_bluetooth_proxy: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml
-
-esp32:
-  framework:
-    type: esp-idf
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_idf_core.yaml

@@ -1,12 +1,5 @@
 ---
 packages:
+  common_idf: !include common_idf.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
-
-esp32:
-  framework:
-    type: esp-idf
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_idf_hw_relays.yaml

@@ -1,13 +1,6 @@
 ---
 packages:
+  common_idf: !include common_idf.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_hw_relays_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml
-
-esp32:
-  framework:
-    type: esp-idf
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_idf_hw_speaker.yaml

@@ -1,13 +1,6 @@
 ---
 packages:
+  common_idf: !include common_idf.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_hw_speaker_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_speaker.yaml
-
-esp32:
-  framework:
-    type: esp-idf
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

.test/esphome_idf_hw_vibration.yaml

@@ -1,13 +1,6 @@
 ---
 packages:
+  common_idf: !include common_idf.yaml
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
   standard_hw_vibration_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml
-
-esp32:
-  framework:
-    type: esp-idf
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
 ...

ESPHome/TX-Ultimate-Easy-ESPHome.yaml

@@ -0,0 +1,19 @@
+####################################################################################################
+#####                              TX Ultimate Easy for ESPHome                                #####
+#####                  Repository: https://github.com/edwardtfn/TX-Ultimate-Easy               #####
+####################################################################################################
+##### Purpose: ESPHome Basic (includes core plus non-essential, but recommended packages)      #####
+####################################################################################################
+##### Author: edwardtfn - https://github.com/edwardtfn - https://buymeacoffee.com/edwardfirmo  #####
+####################################################################################################
+##### NOTE:                                                                                    #####
+##### - Make changes ONLY if absolutely necessary and you have the required knowledge.         #####
+##### - For normal system use, modifications to this file are NOT required.                    #####
+####################################################################################################
+---
+packages:
+  # yamllint disable rule:colons
+  core:     !include TX-Ultimate-Easy-ESPHome_core.yaml
+  standard: !include TX-Ultimate-Easy-ESPHome_standard.yaml
+  # yamllint enable rule:colons
+...

ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml

@@ -11,13 +11,35 @@
 ##### - For normal system use, modifications to this file are NOT required.                    #####
 ####################################################################################################
 ---
+packages:
+  standard_hw_speaker: !include TX-Ultimate-Easy-ESPHome_standard_hw_speaker.yaml
+
 bluetooth_proxy:
 
+esp32:
+  framework:
+    type: esp-idf
+
 esphome:
   platformio_options:
     build_flags:
       - -D TX_ULTIMATE_EASY_ADDON_BLE_PROXY
 
+i2s_audio: !remove
+
+light:
+  - id: !extend light_full
+    platform: esp32_rmt_led_strip
+    rgb_order: GRB
+    rmt_channel: 1
+    chipset: ws2812
+    max_refresh_rate: 33ms
+    use_psram: false
+    type: !remove
+    variant: !remove
+
+media_player: !remove
+
 script:
   - id: !extend dump_config_list_packages
     then:
@@ -30,4 +52,7 @@ script:
 
           // Identify itself
           ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Add-on - BLE Proxy");
+
+switch:
+  - id: !remove sw_speaker_amplifier
 ...

ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml

@@ -11,312 +11,11 @@
 ##### - For normal system use, modifications to this file are NOT required.                    #####
 ####################################################################################################
 ---
-substitutions:
-  name: tx-ultimate-easy
-  friendly_name: TX Ultimate Easy
-
-  <<: !include ../versioning/VERSION_YAML
-
-  TX_MODEL_FORMAT_EU_TEXT: "EU (Square, T5-xC-86)"
-  TX_MODEL_FORMAT_US_TEXT: "US (Rectangle, T5-xC-120)"
-
-  TX_MODEL_1_GANG_TEXT: "1 Gang"
-  TX_MODEL_2_GANG_TEXT: "2 Gang"
-  TX_MODEL_3_GANG_TEXT: "3 Gang"
-  TX_MODEL_4_GANG_TEXT: "4 Gang"
-
-  DUMP_CONFIG_CALLER_DELAY: 10s  # Delay to dump config after requested
-
 packages:
   # yamllint disable rule:colons
+  core_common:     !include TX-Ultimate-Easy-ESPHome_core_common.yaml
   core_hw_buttons: !include TX-Ultimate-Easy-ESPHome_core_hw_buttons.yaml
   core_hw_leds:    !include TX-Ultimate-Easy-ESPHome_core_hw_leds.yaml
   core_hw_touch:   !include TX-Ultimate-Easy-ESPHome_core_hw_touch.yaml
   # yamllint enable rule:colons
-
-api:
-  id: api_server
-  on_client_connected:
-    then:
-      - script.execute: dump_config_caller
-      - script.execute: publish_device_info
-
-binary_sensor:
-  - id: bs_pending_restart
-    name: Pending Restart Status
-    internal: false
-    disabled_by_default: false
-    platform: template
-    entity_category: diagnostic
-    device_class: problem
-    on_state:
-      then:
-        - lambda: |-
-            if (x)
-              ESP_LOGW("core", "Pending restart: YES");
-            else
-              ESP_LOGCONFIG("core", "Pending restart: No");
-        - script.execute: dump_config_caller
-
-esp32:
-  board: esp32dev  # adafruit_feather_esp32_v2  # esp32dev
-  flash_size: 8MB
-  framework:
-    type: esp-idf
-
-esphome:
-  name: ${name}
-  friendly_name: ${friendly_name}
-  comment: TX Ultimate Easy
-  project:
-    name: "edwardtfn.tx_ultimate_easy"
-    version: ${version}
-  platformio_options:
-    build_flags:
-      - -D TX_ULTIMATE_EASY_CORE
-
-  on_boot:
-    - priority: 700
-      then:
-        - script.execute: boot_initialize
-
-    - priority: 600  # This is where most sensors are set up.
-      then:
-        - script.execute: boot_sequence
-
-    - priority: -100  # At this priority, pretty much everything should already be initialized.
-      then:
-        - script.execute: boot_done
-
-globals:
-  - id: is_us_model
-    type: bool
-    restore_value: true
-    initial_value: 'false'
-
-  - id: gang_count
-    type: uint8_t
-    restore_value: true
-    initial_value: '0'
-
-  - id: gang_count_plural_suffix
-    type: std::string
-    restore_value: true
-    max_restore_data_length: 3
-    # initial_value: "''"
-
-logger:
-  level: DEBUG
-
-ota:
-  platform: esphome
-
-psram:
-  mode: octal
-  speed: 80MHz
-
-script:
-  - id: api_send_ha_event_boot
-    mode: queued
-    parameters:
-      type: string
-    then:
-      - homeassistant.event:
-          event: esphome.tx_ultimate_easy
-          data:
-            device_name: !lambda return tx_device_name->state.c_str();
-            firmware: ${version}
-            domain: boot
-            type: !lambda return type.c_str();
-
-  - id: boot_done
-    mode: restart
-    then:
-      - script.execute:
-          id: api_send_ha_event_boot
-          type: done
-
-  - id: boot_initialize
-    mode: restart
-    then:
-      # Extended by:
-      #   - HW Buttons
-      #   - HW Relays
-      #   - HW Touch
-      - script.execute:
-          id: api_send_ha_event_boot
-          type: start
-      - wait_until:
-          condition:
-            - lambda: return sl_tx_model_format->active_index().has_value();
-            - lambda: return sl_tx_model_gang->active_index().has_value();
-      - lambda: |-
-          id(is_us_model) = (sl_tx_model_format->state == "${TX_MODEL_FORMAT_US_TEXT}");
-          id(gang_count) = sl_tx_model_gang->active_index().value() + 1;
-          if (id(gang_count) < 1 || id(gang_count) > 4) {
-            ESP_LOGE("core_hw_leds", "Invalid number of gangs: %" PRIu8, id(gang_count));
-          }
-          id(gang_count_plural_suffix) = id(gang_count) > 1 ? "s" : "";
-
-  - id: boot_sequence
-    mode: restart
-    then:
-      - script.execute: publish_device_info
-      - binary_sensor.template.publish:
-          id: bs_pending_restart
-          state: false
-
-  - id: dump_config
-    mode: restart
-    then:
-      # Extended by all modules
-      - lambda: |-
-          // Device identification
-          ESP_LOGCONFIG("core", "Device friendly name: ${friendly_name}");
-          ESP_LOGCONFIG("core", "Device name: ${name}");
-          ESP_LOGCONFIG("core", "Device name (HA): %s", tx_device_name->state.c_str());
-          ESP_LOGCONFIG("core", "Device hostname: %s", App.get_name().c_str());
-
-          dump_config_versions->execute();
-
-          // Framework detection
-          #ifdef USE_ARDUINO
-          ESP_LOGCONFIG("core", "Framework: Arduino");
-          #elif defined(USE_ESP_IDF)
-          ESP_LOGCONFIG("core", "Framework: ESP-IDF");
-          #else
-          ESP_LOGW("core", "Framework: UNKNOWN");
-          #endif
-
-          // Model configuration
-          ESP_LOGCONFIG("core", "Model format (selected): %s", sl_tx_model_format->state.c_str());
-          ESP_LOGCONFIG("core", "Model format (detected): %s", id(is_us_model) ? "US" : "EU");
-          ESP_LOGCONFIG("core", "Gangs (selected): %s", sl_tx_model_gang->state.c_str());
-          ESP_LOGCONFIG("core", "Gangs (detected): %" PRIu8 "-Gang%s", id(gang_count), id(gang_count_plural_suffix).c_str());
-
-          // System state
-          if (bs_pending_restart->state)
-            ESP_LOGW("core", "Pending restart: YES");
-          else
-            ESP_LOGCONFIG("core", "Pending restart: No");
-
-  - id: dump_config_caller
-    mode: restart
-    then:
-      - delay: ${DUMP_CONFIG_CALLER_DELAY}
-      - script.execute: dump_config
-      - script.wait: dump_config
-      - script.execute: dump_config_list_packages
-
-  - id: dump_config_list_packages
-    mode: restart
-    then:
-      - script.wait: dump_config
-      - lambda: |-
-          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "Installed packages:");
-
-          // Identify itself
-          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Core");
-
-  - id: dump_config_versions
-    mode: restart
-    then:
-      - lambda: |-
-          // Version information
-          ESP_LOGCONFIG("core", "TX Ultimate firmware version: ${version}");
-
-  - id: publish_device_info
-    mode: restart
-    then:
-      - lambda: |-
-          tx_fw_version->publish_state("${version}");
-          tx_device_name->publish_state(App.get_name().c_str());
-
-select:
-  - id: sl_tx_model_format
-    name: Model (Format)
-    platform: template
-    options:
-      - "${TX_MODEL_FORMAT_EU_TEXT}"
-      - "${TX_MODEL_FORMAT_US_TEXT}"
-    initial_option: "${TX_MODEL_FORMAT_EU_TEXT}"
-    optimistic: true
-    restore_value: true
-    internal: false
-    entity_category: config
-    disabled_by_default: false
-    icon: mdi:tablet-cellphone
-    on_value:
-      then:
-        - binary_sensor.template.publish:
-            id: bs_pending_restart
-            state: true
-        - lambda: |-
-            id(is_us_model) = (x == "${TX_MODEL_FORMAT_US_TEXT}");
-            ESP_LOGI("core", "New model selected: %s", id(is_us_model) ? "US" : "EU");
-
-  - id: sl_tx_model_gang
-    name: Model (Gang)
-    platform: template
-    options:
-      - "${TX_MODEL_1_GANG_TEXT}"
-      - "${TX_MODEL_2_GANG_TEXT}"
-      - "${TX_MODEL_3_GANG_TEXT}"
-      - "${TX_MODEL_4_GANG_TEXT}"
-    initial_option: "${TX_MODEL_1_GANG_TEXT}"
-    optimistic: true
-    restore_value: true
-    internal: false
-    entity_category: config
-    disabled_by_default: false
-    icon: mdi:dip-switch
-    on_value:
-      then:
-        - binary_sensor.template.publish:
-            id: bs_pending_restart
-            state: true
-        - lambda: |-
-            id(gang_count) = static_cast<uint8_t>(i) + 1;
-            ESP_LOGI("core", "New model selected: %" PRIu8 "-%s", id(gang_count), id(gang_count) > 1 ? "Gangs" : "Gang");
-            tx_ultimate->set_gang_count(id(gang_count));
-
-text_sensor:
-  - id: tx_fw_version
-    name: TX Ultimate Easy Firmware Version
-    platform: template
-    entity_category: diagnostic
-    icon: mdi:tag-text-outline
-    internal: false
-    update_interval: never
-    lambda: |-
-      return {"${version}"};
-
-  - id: tx_device_name
-    name: Device Name
-    platform: template
-    icon: mdi:identifier
-    entity_category: diagnostic
-    internal: false
-    disabled_by_default: false
-    update_interval: never
-    lambda: |-
-      return {"${name}"};
-    filters:
-      - lambda: |-
-          const std::string raw_name = x;
-          std::string result;
-          bool last_was_underscore = false;
-          for (const char& c : raw_name) {
-            if (isalnum(c)) {
-              result += tolower(c);  // Add alphanumeric characters as lowercase
-              last_was_underscore = false;
-            } else if (!last_was_underscore) {  // Replace non-alphanumeric with '_' but avoid consecutive '_'
-              result += '_';
-              last_was_underscore = true;
-            }
-          }
-          return result;
-
-wifi:
-  id: wifi_component
 ...

ESPHome/TX-Ultimate-Easy-ESPHome_core_common.yaml

@@ -0,0 +1,322 @@
+####################################################################################################
+#####                              TX Ultimate Easy for ESPHome                                #####
+#####                  Repository: https://github.com/edwardtfn/TX-Ultimate-Easy               #####
+####################################################################################################
+##### Purpose: ESPHome Core - Common                                                           #####
+####################################################################################################
+##### Author: edwardtfn - https://github.com/edwardtfn - https://buymeacoffee.com/edwardfirmo  #####
+####################################################################################################
+##### NOTE:                                                                                    #####
+##### - Make changes ONLY if absolutely necessary and you have the required knowledge.         #####
+##### - For normal system use, modifications to this file are NOT required.                    #####
+####################################################################################################
+---
+substitutions:
+  name: tx-ultimate-easy
+  friendly_name: TX Ultimate Easy
+
+  <<: !include ../versioning/VERSION_YAML
+
+  TX_MODEL_FORMAT_EU_TEXT: "EU (Square, T5-xC-86)"
+  TX_MODEL_FORMAT_US_TEXT: "US (Rectangle, T5-xC-120)"
+
+  TX_MODEL_1_GANG_TEXT: "1 Gang"
+  TX_MODEL_2_GANG_TEXT: "2 Gang"
+  TX_MODEL_3_GANG_TEXT: "3 Gang"
+  TX_MODEL_4_GANG_TEXT: "4 Gang"
+
+  DUMP_CONFIG_CALLER_DELAY: 10s  # Delay to dump config after requested
+
+
+api:
+  id: api_server
+  on_client_connected:
+    then:
+      - script.execute: dump_config_caller
+      - script.execute: publish_device_info
+
+binary_sensor:
+  - id: bs_pending_restart
+    name: Pending Restart Status
+    internal: false
+    disabled_by_default: false
+    platform: template
+    entity_category: diagnostic
+    device_class: problem
+    on_state:
+      then:
+        - lambda: |-
+            if (x)
+              ESP_LOGW("core", "Pending restart: YES");
+            else
+              ESP_LOGCONFIG("core", "Pending restart: No");
+        - script.execute: dump_config_caller
+
+button:
+  - id: bt_restart
+    name: Restart
+    internal: false
+    platform: restart
+
+esp32:
+  board: esp32dev
+  flash_size: 8MB
+
+esphome:
+  name: ${name}
+  friendly_name: ${friendly_name}
+  comment: TX Ultimate Easy
+  project:
+    name: "edwardtfn.tx_ultimate_easy"
+    version: ${version}
+  platformio_options:
+    build_flags:
+      - -D TX_ULTIMATE_EASY_CORE
+
+  on_boot:
+    - priority: 700
+      then:
+        - script.execute: boot_initialize
+
+    - priority: 600  # This is where most sensors are set up.
+      then:
+        - script.execute: boot_sequence
+
+    - priority: -100  # At this priority, pretty much everything should already be initialized.
+      then:
+        - script.execute: boot_done
+
+globals:
+  - id: is_us_model
+    type: bool
+    restore_value: true
+    initial_value: 'false'
+
+  - id: gang_count
+    type: uint8_t
+    restore_value: true
+    initial_value: '0'
+
+  - id: gang_count_plural_suffix
+    type: std::string
+    restore_value: true
+    max_restore_data_length: 3
+
+logger:
+  level: DEBUG
+
+ota:
+  platform: esphome
+
+psram:
+  mode: octal
+  speed: 80MHz
+
+script:
+  - id: api_send_ha_event_boot
+    mode: queued
+    parameters:
+      type: string
+    then:
+      - homeassistant.event:
+          event: esphome.tx_ultimate_easy
+          data:
+            device_name: !lambda return tx_device_name->state.c_str();
+            firmware: ${version}
+            domain: boot
+            type: !lambda return type.c_str();
+
+  - id: boot_done
+    mode: restart
+    then:
+      - script.execute:
+          id: api_send_ha_event_boot
+          type: done
+
+  - id: boot_initialize
+    mode: restart
+    then:
+      # Extended by:
+      #   - HW Buttons
+      #   - HW Relays
+      #   - HW Touch
+      - script.execute:
+          id: api_send_ha_event_boot
+          type: start
+      - wait_until:
+          condition:
+            - lambda: return sl_tx_model_format->active_index().has_value();
+            - lambda: return sl_tx_model_gang->active_index().has_value();
+      - lambda: |-
+          id(is_us_model) = (sl_tx_model_format->state == "${TX_MODEL_FORMAT_US_TEXT}");
+          id(gang_count) = sl_tx_model_gang->active_index().value() + 1;
+          if (id(gang_count) < 1 || id(gang_count) > 4) {
+            ESP_LOGE("core_hw_leds", "Invalid number of gangs: %" PRIu8, id(gang_count));
+          }
+          id(gang_count_plural_suffix) = id(gang_count) > 1 ? "s" : "";
+
+  - id: boot_sequence
+    mode: restart
+    then:
+      - script.execute: publish_device_info
+      - binary_sensor.template.publish:
+          id: bs_pending_restart
+          state: false
+
+  - id: dump_config
+    mode: restart
+    then:
+      # Extended by all modules
+      - lambda: |-
+          // Device identification
+          ESP_LOGCONFIG("core", "Device friendly name: ${friendly_name}");
+          ESP_LOGCONFIG("core", "Device name: ${name}");
+          ESP_LOGCONFIG("core", "Device name (HA): %s", tx_device_name->state.c_str());
+          ESP_LOGCONFIG("core", "Device hostname: %s", App.get_name().c_str());
+
+          dump_config_versions->execute();
+
+          // Framework detection
+          #ifdef USE_ARDUINO
+          ESP_LOGCONFIG("core", "Framework: Arduino");
+          #elif defined(USE_ESP_IDF)
+          ESP_LOGCONFIG("core", "Framework: ESP-IDF");
+          #else
+          ESP_LOGW("core", "Framework: UNKNOWN");
+          #endif
+
+          // Model configuration
+          ESP_LOGCONFIG("core", "Model format (selected): %s", sl_tx_model_format->state.c_str());
+          ESP_LOGCONFIG("core", "Model format (detected): %s", id(is_us_model) ? "US" : "EU");
+          ESP_LOGCONFIG("core", "Gangs (selected): %s", sl_tx_model_gang->state.c_str());
+          ESP_LOGCONFIG("core", "Gangs (detected): %" PRIu8 "-Gang%s", id(gang_count), id(gang_count_plural_suffix).c_str());
+
+          // System state
+          if (bs_pending_restart->state)
+            ESP_LOGW("core", "Pending restart: YES");
+          else
+            ESP_LOGCONFIG("core", "Pending restart: No");
+
+  - id: dump_config_caller
+    mode: restart
+    then:
+      - delay: ${DUMP_CONFIG_CALLER_DELAY}
+      - script.execute: dump_config
+      - script.wait: dump_config
+      - script.execute: dump_config_list_packages
+
+  - id: dump_config_list_packages
+    mode: restart
+    then:
+      - script.wait: dump_config
+      - lambda: |-
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "Installed packages:");
+
+          // Identify itself
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Core");
+
+  - id: dump_config_versions
+    mode: restart
+    then:
+      - lambda: |-
+          // Version information
+          ESP_LOGCONFIG("core", "TX Ultimate firmware version: ${version}");
+          // ESPHome builder information
+          ESP_LOGCONFIG("core", "ESPHome builder: " ESPHOME_VERSION);
+          ESP_LOGCONFIG("core", "ESPHome build timestamp: %s", App.get_compilation_time().c_str());
+
+  - id: publish_device_info
+    mode: restart
+    then:
+      - lambda: |-
+          tx_fw_version->publish_state("${version}");
+          tx_device_name->publish_state(App.get_name().c_str());
+
+select:
+  - id: sl_tx_model_format
+    name: Model (Format)
+    platform: template
+    options:
+      - "${TX_MODEL_FORMAT_EU_TEXT}"
+      - "${TX_MODEL_FORMAT_US_TEXT}"
+    initial_option: "${TX_MODEL_FORMAT_EU_TEXT}"
+    optimistic: true
+    restore_value: true
+    internal: false
+    entity_category: config
+    disabled_by_default: false
+    icon: mdi:tablet-cellphone
+    on_value:
+      then:
+        - binary_sensor.template.publish:
+            id: bs_pending_restart
+            state: true
+        - lambda: |-
+            id(is_us_model) = (x == "${TX_MODEL_FORMAT_US_TEXT}");
+            ESP_LOGI("core", "New model selected: %s", id(is_us_model) ? "US" : "EU");
+
+  - id: sl_tx_model_gang
+    name: Model (Gang)
+    platform: template
+    options:
+      - "${TX_MODEL_1_GANG_TEXT}"
+      - "${TX_MODEL_2_GANG_TEXT}"
+      - "${TX_MODEL_3_GANG_TEXT}"
+      - "${TX_MODEL_4_GANG_TEXT}"
+    initial_option: "${TX_MODEL_1_GANG_TEXT}"
+    optimistic: true
+    restore_value: true
+    internal: false
+    entity_category: config
+    disabled_by_default: false
+    icon: mdi:dip-switch
+    on_value:
+      then:
+        - binary_sensor.template.publish:
+            id: bs_pending_restart
+            state: true
+        - lambda: |-
+            id(gang_count) = static_cast<uint8_t>(i) + 1;
+            ESP_LOGI("core", "New model selected: %" PRIu8 "-%s", id(gang_count), id(gang_count) > 1 ? "Gangs" : "Gang");
+            tx_ultimate->set_gang_count(id(gang_count));
+
+text_sensor:
+  - id: tx_fw_version
+    name: TX Ultimate Easy Firmware Version
+    platform: template
+    entity_category: diagnostic
+    icon: mdi:tag-text-outline
+    internal: false
+    update_interval: never
+    lambda: |-
+      return {"${version}"};
+
+  - id: tx_device_name
+    name: Device Name
+    platform: template
+    icon: mdi:identifier
+    entity_category: diagnostic
+    internal: false
+    disabled_by_default: false
+    update_interval: never
+    lambda: |-
+      return {"${name}"};
+    filters:
+      - lambda: |-
+          const std::string raw_name = x;
+          std::string result;
+          bool last_was_underscore = false;
+          for (const char& c : raw_name) {
+            if (isalnum(c)) {
+              result += tolower(c);  // Add alphanumeric characters as lowercase
+              last_was_underscore = false;
+            } else if (!last_was_underscore) {  // Replace non-alphanumeric with '_' but avoid consecutive '_'
+              result += '_';
+              last_was_underscore = true;
+            }
+          }
+          return result;
+
+wifi:
+  id: wifi_component
+...

ESPHome/TX-Ultimate-Easy-ESPHome_core_hw_leds.yaml

@@ -47,15 +47,12 @@ light:
   - id: light_full
     name: Light - All
     internal: true
-    platform: esp32_rmt_led_strip
-    rgb_order: GRB
-    rmt_channel: 1
-    chipset: ws2812
     num_leds: 32
     pin: GPIO13
     restore_mode: ${LIGHT_FULL_RESTORE_MODE}
-    max_refresh_rate: 33ms
+    platform: neopixelbus
-    use_psram: true
+    type: GRB
+    variant: WS2811
 
   # Those lights are available based on the model selections
   - &light_partition_with_effects

ESPHome/TX-Ultimate-Easy-ESPHome_core_hw_touch.yaml

@@ -318,7 +318,7 @@ script:
       #   - HW Vibration
       - binary_sensor.template.publish:
           id: bs_multi_touch
-          state: OFF  # yamllint disable-line rule:truthy
+          state: ON  # yamllint disable-line rule:truthy
 
   - id: touch_on_press
     mode: restart

ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml

@@ -13,60 +13,8 @@
 ---
 packages:
   # yamllint disable rule:colons
-  core_hw_relays:    !include TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml
+  standard_hw_relays:    !include TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml
-  core_hw_speaker:   !include TX-Ultimate-Easy-ESPHome_standard_hw_speaker.yaml
+  standard_hw_vibration: !include TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml
-  core_hw_vibration: !include TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml
+  standard_media_player: !include TX-Ultimate-Easy-ESPHome_standard_media_player.yaml
   # yamllint enable rule:colons
-
-button:
-  - id: bt_restart
-    name: Restart
-    internal: false
-    platform: restart
-
-captive_portal:
-  id: ap_captive_portal
-
-esphome:
-  platformio_options:
-    build_flags:
-      - -D TX_ULTIMATE_EASY_STANDARD
-
-script:
-  - id: !extend dump_config_list_packages
-    then:
-      - script.wait: dump_config
-      - lambda: |-
-          // Check for requirements
-          #if !defined(TX_ULTIMATE_EASY_CORE)
-            #error "The package TX-Ultimate-Easy-ESPHome_core.yaml is required."
-          #endif
-
-          // Identify itself
-          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Standard");
-
-  - id: !extend dump_config_versions
-    then:
-      - lambda: |-
-          // Version information
-          ESP_LOGCONFIG("standard", "ESPHome builder: %s", esphome_fw_version->state.c_str());
-
-improv_serial:
-  id: serial_improv
-
-text_sensor:
-  - id: esphome_fw_version
-    name: ESPHome Version
-    platform: version
-    entity_category: diagnostic
-    internal: false
-
-time:
-  - id: time_source
-    platform: homeassistant
-
-web_server:
-
-wifi:
-  ap:
 ...

ESPHome/TX-Ultimate-Easy-ESPHome_standard_media_player.yaml

@@ -0,0 +1,64 @@
+####################################################################################################
+#####                              TX Ultimate Easy for ESPHome                                #####
+#####                  Repository: https://github.com/edwardtfn/TX-Ultimate-Easy               #####
+####################################################################################################
+##### Purpose: ESPHome - Add-on - Media player                                                 #####
+####################################################################################################
+##### Author: edwardtfn - https://github.com/edwardtfn - https://buymeacoffee.com/edwardfirmo  #####
+####################################################################################################
+##### NOTE:                                                                                    #####
+##### - Make changes ONLY if absolutely necessary and you have the required knowledge.         #####
+##### - For normal system use, modifications to this file are NOT required.                    #####
+####################################################################################################
+---
+packages:
+  standard_hw_audio: !include TX-Ultimate-Easy-ESPHome_standard_hw_audio.yaml
+
+esphome:
+  platformio_options:
+    build_flags:
+      - -D TX_ULTIMATE_EASY_ADDON_MEDIA_PLAYER
+
+media_player:
+  - id: mp_media_player
+    name: Media Player
+    internal: false
+    platform: i2s_audio
+    i2s_dout_pin: GPIO15
+    i2s_audio_id: if_i2s_audio
+    i2s_comm_fmt: msb
+    dac_type: external
+    mode: mono
+    mute_pin:
+      number: GPIO26
+      inverted: true
+      allow_other_uses: true
+
+script:
+  - id: !extend dump_config_list_packages
+    then:
+      - script.wait: dump_config
+      - lambda: |-
+          // Check for requirements
+          #if !defined(TX_ULTIMATE_EASY_CORE)
+            #error "The package TX-Ultimate-Easy-ESPHome_core.yaml is required."
+          #endif
+          #if !defined(TX_ULTIMATE_EASY_STANDARD_HW_AUDIO)
+            #error "The package TX-Ultimate-Easy-ESPHome_standard_hw_audio.yaml is required."
+          #endif
+
+          // Identify itself
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Add-on - Media Player");
+
+switch:
+  - id: sw_speaker_amplifier
+    name: Speaker - Amplifier
+    platform: gpio
+    pin:
+      number: GPIO26
+      inverted: true
+      allow_other_uses: true
+    restore_mode: RESTORE_DEFAULT_ON
+    internal: true
+    entity_category: config
+...

README.md

@@ -8,10 +8,10 @@
 [![Discord][discord-shield]](https://discord.gg/Db6WJWzWuf)
 [![Buy me an ice-cream][buymeacoffee-shield]](https://www.buymeacoffee.com/edwardfirmo)
 
-<!-- markdownlint-disable MD013 -->
+<!-- markdownlint-disable MD013 MD033 -->
-| &nbsp;![TX Ultimate Easy Logo](Assets/Logo.webp) | TX Ultimate Easy provides custom ESPHome firmware for Sonoff TX Ultimate devices. Our project focuses on user-friendly configuration through the Home Assistant UI, eliminating the need for manual YAML editing. Whether you're new to home automation or an experienced user, TX Ultimate Easy makes it simple to manage your device. |
+| &nbsp;<picture><source media="(prefers-color-scheme: dark)" srcset="Assets/Logo_dark.png"><source media="(prefers-color-scheme: light)" srcset="Assets/Logo_light.png"><img alt="TX Ultimate Easy Logo" src="Assets/Logo_light.png"></picture> | TX Ultimate Easy provides custom ESPHome firmware for Sonoff TX Ultimate devices. Our project focuses on user-friendly configuration through the Home Assistant UI, eliminating the need for manual YAML editing. Whether you're new to home automation or an experienced user, TX Ultimate Easy makes it simple to manage your device. |
 | --- | :-- |
-<!-- markdownlint-enable MD013 -->
+<!-- markdownlint-enable MD013 MD033 -->
 
 [version-shield]: https://img.shields.io/github/v/tag/edwardtfn/TX-Ultimate-Easy?label=version
 [version]: https://github.com/edwardtfn/TX-Ultimate-Easy/tags
@@ -111,28 +111,81 @@ Follow these steps to get your TX Ultimate device up and running with ESPHome.
 4. Copy this basic configuration to your new device:
    ```yaml
    substitutions:
-     name: tx-ultimate-easy  # Change this to your device name
+     name: tx-ultimate-easy
      friendly_name: TX Ultimate Easy
-   
+
-   packages:
-     remote_package:
-       url: https://github.com/edwardtfn/TX-Ultimate-Easy
-       ref: main  # For latest stable release
-       files:
-         - ESPHome/TX-Ultimate-Easy-ESPHome.yaml
-   
    wifi:
      ssid: !secret wifi_ssid
      password: !secret wifi_password
-   ```
 
+   packages:
+     remote_package:
+       url: https://github.com/edwardtfn/TX-Ultimate-Easy
+       ref: stable  # Or you can specify a version, like `ref: v2024.12.6` or `ref: latest` to the latest non-stable
+       refresh: 5min
+       files:
+         - ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml                  # Core (essential) packages
+         - ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml              # Non-essential, but recommended packages
+         # - ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml     # Adds BLE proxy support
+   ```
    You can also use a specific version tag for better control over updates:
    ```yaml
    ref: v2024.12.2  # Using specific version for controlled updates
    ```
-    **Note:** [Click here](https://github.com/edwardtfn/TX-Ultimate-Easy/tags) for a full list of versions available.
+    **Notes:**
+      - [Click here](https://github.com/edwardtfn/TX-Ultimate-Easy/tags) for a full list of versions available.
+      - [Click here](TX-Ultimate-Easy-ESPHome.yaml)
+        for the latest version of this yaml.
 5. Click "Save" and then "Install"
 
+> [!IMPORTANT]  
+> Starting from version 2025.1.0, non-essential components like `web_server`, `captive_portal`, and `wifi`
+> are no longer included in the core package. If you need these components,
+> you must add them manually to your local configuration file.
+> For example:
+> ```yaml
+> # Add these to your configuration if needed
+> web_server:
+> captive_portal:
+> wifi:
+>   ap: # Access point configuration
+> ```
+
+### Advanced Settings
+For more granular control over components,
+you can use our [advanced configuration template](TX-Ultimate-Easy-ESPHome_advanced.yaml).
+This template allows you to selectively include specific packages, which can be useful for:
+
+- Troubleshooting specific components
+- Reducing memory usage by excluding unused features
+- Customizing functionality for specific use cases
+
+Here's an example of the advanced configuration:
+```yaml
+packages:
+  remote_package:
+    url: https://github.com/edwardtfn/TX-Ultimate-Easy
+    ref: stable  # Or you can specify a version, like `ref: v2024.12.6` or `ref: latest` to the latest non-stable
+    refresh: 5min
+    files:
+      # Core (essential) packages
+      - ESPHome/TX-Ultimate-Easy-ESPHome_core_common.yaml      # Basic shared settings
+      - ESPHome/TX-Ultimate-Easy-ESPHome_core_hw_buttons.yaml  # Button logic
+      - ESPHome/TX-Ultimate-Easy-ESPHome_core_hw_leds.yaml     # LED configuration
+      - ESPHome/TX-Ultimate-Easy-ESPHome_core_hw_touch.yaml    # Touch panel support
+
+      # Optional but recommended packages
+      - ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml     # Relay control
+      - ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml  # Haptic feedback
+
+      # Audio options (use none or choose only one - using both will fail)
+      - ESPHome/TX-Ultimate-Easy-ESPHome_standard_media_player.yaml  # Media player (Recommended for most users)
+      # - ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_speaker.yaml  # Basic speaker
+```
+
+> [!NOTE]
+> Use the advanced configuration with caution. Excluding core packages may cause instability or reduced functionality.
+
 ### Device Flashing
 
 Initial flashing must be done via serial connection.
@@ -314,5 +367,9 @@ This project is licensed under the MIT License - see the [LICENSE](LICENSE) file
 ---
 
 <!-- markdownlint-disable MD033 -->
-<img src="Assets/Logo.webp" alt="TX Ultimate Easy Logo" width="100"/>
+<picture>
+  <source media="(prefers-color-scheme: dark)" srcset="Assets/Logo_dark.png">
+  <source media="(prefers-color-scheme: light)" srcset="Assets/Logo_light.png">
+  <img alt="TX Ultimate Easy Logo" src="Assets/Logo_light.png" width="100">
+</picture>
 <!-- markdownlint-enable MD033 -->

TX-Ultimate-Easy-ESPHome.yaml

@@ -16,11 +16,10 @@ wifi:
 packages:
   remote_package:
     url: https://github.com/edwardtfn/TX-Ultimate-Easy
-    ref: latest  # Or you can specify a version, like `ref: v2024.12.6`
+    ref: stable  # Or you can specify a version, like `ref: v2024.12.6` or `ref: latest` to the latest non-stable
     refresh: 5min
     files:
       - ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml                  # Core (essential) packages
       - ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml              # Non-essential, but recommended packages
       # - ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml     # Adds BLE proxy support
-      # - ESPHome/TX-Ultimate-Easy-ESPHome_addon_media_player.yaml  # Adds experimental Media Player (limited)
 ...

TX-Ultimate-Easy-ESPHome_advanced.yaml

@@ -0,0 +1,38 @@
+####################################################################################################
+#####                              TX Ultimate Easy for ESPHome                                #####
+#####                  Repository: https://github.com/edwardtfn/TX-Ultimate-Easy               #####
+####################################################################################################
+##### Author: edwardtfn - https://github.com/edwardtfn - https://buymeacoffee.com/edwardfirmo  #####
+####################################################################################################
+##### WARNING: This is an advanced configuration template. Use with caution as improper        #####
+##### configuration may lead to reduced functionality or system instability.                   #####
+####################################################################################################
+---
+substitutions:
+  name: tx-ultimate-easy-adv
+  friendly_name: TX Ultimate Easy Advanced
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+packages:
+  remote_package:
+    url: https://github.com/edwardtfn/TX-Ultimate-Easy
+    ref: stable  # Or you can specify a version, like `ref: v2024.12.6` or `ref: latest` to the latest non-stable
+    refresh: 5min
+    files:
+      # Core (essential) packages - Do not disable these unless you know what you're doing
+      - ESPHome/TX-Ultimate-Easy-ESPHome_core_common.yaml            # Basic shared settings
+      - ESPHome/TX-Ultimate-Easy-ESPHome_core_hw_buttons.yaml        # Button logic
+      - ESPHome/TX-Ultimate-Easy-ESPHome_core_hw_leds.yaml           # LED configuration
+      - ESPHome/TX-Ultimate-Easy-ESPHome_core_hw_touch.yaml          # Touch panel support
+
+      # Optional functionality - Can be enabled/disabled as needed
+      - ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml     # Relay control
+      - ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml  # Haptic feedback
+
+      # Audio options (use none or choose only one - using both will fail)
+      - ESPHome/TX-Ultimate-Easy-ESPHome_standard_media_player.yaml  # Media player (Recommended for most users)
+      # - ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_speaker.yaml  # Basic speaker
+...

components/tx_ultimate_easy/__init__.py

@@ -1,11 +1,11 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
+from esphome import automation
 from esphome.components import uart
 from esphome.const import (
     CONF_ID,
 )
-
+from esphome.core import CORE
-from esphome import automation
 
 CODEOWNERS = ["@edwardtfn"]
 DEPENDENCIES = ['uart']
@@ -109,3 +109,17 @@ async def to_code(config):
     await cg.register_component(var, config)
     await uart.register_uart_device(var, config)
     await register_tx_ultimate_easy(var, config)
+
+    if CORE.using_esp_idf:
+        add_idf_sdkconfig_option("CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST", True)
+        add_idf_sdkconfig_option("CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY", True)
+        add_idf_sdkconfig_option("CONFIG_ESP32_REV_MIN_3", True)
+        add_idf_sdkconfig_option("CONFIG_MBEDTLS_DYNAMIC_BUFFER", True)
+        add_idf_sdkconfig_option("CONFIG_MBEDTLS_DYNAMIC_FREE_CA_CERT", True)
+        add_idf_sdkconfig_option("CONFIG_MBEDTLS_DYNAMIC_FREE_CONFIG_DATA", True)
+        add_idf_sdkconfig_option("CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC", True)
+        add_idf_sdkconfig_option("CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY", True)
+        add_idf_sdkconfig_option("CONFIG_SPIRAM_RODATA", True)
+        add_idf_sdkconfig_option("CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP", True)
+
+    cg.add_define("USE_TX_ULTIMATE_EASY")

versioning/VERSION

@@ -1 +1 @@
-2024.12.25
+2025.1.3

versioning/VERSION_YAML

@@ -1 +1 @@
-version: 2024.12.25
+version: 2025.1.3