Bump version to 2024.12.22 [skip-versioning]

Reorganize project's files

.github/workflows/validate_esphome.yml

@@ -1,6 +1,10 @@
 ---
 name: Validate ESPHome (Latest)
 
+permissions:
+  contents: read
+  pull-requests: read
+
 on:  # yamllint disable-line rule:truthy
   workflow_dispatch:
 
@@ -27,36 +31,234 @@ jobs:
       - name: Validate YAML files
         run: find . -name "*.yaml" -exec yamllint -c ./.rules/yamllint.yml {} +
 
-  build_basic:
-    name: Basic
+  build_ard_core:
+    name: Core (Arduino)
+    needs: code_scan
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@main
-      - name: Build core
+      - name: Build Core (Arduino)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_ard_core.yaml"
+          version: latest
+
+  build_idf_core:
+    name: Core (IDF)
+    needs: code_scan
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build Core (IDF)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf_core.yaml"
+          version: latest
+
+  build_idf53_core:
+    name: Core (IDF v5.3)
+    needs: code_scan
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build Core (IDF v5.3)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf53_core.yaml"
+          version: latest
+
+  build_ard_basic:
+    name: Basic (Arduino)
+    needs: build_ard_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build Basic (Arduino)
         uses: esphome/build-action@main
         with:
           yaml-file: ".test/esphome_ard_basic.yaml"
           version: latest
 
-  build_bluetooth_proxy_4:
-    name: Bluetooth Proxy (IDF)
+  build_idf_basic:
+    name: Basic (IDF)
+    needs: build_idf_core
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@main
-      - name: Build core
+      - name: Build Basic (IDF)
         uses: esphome/build-action@main
         with:
-          yaml-file: ".test/esphome_idf_bluetooth_proxy.yaml"
+          yaml-file: ".test/esphome_idf_basic.yaml"
           version: latest
 
-  build_bluetooth_proxy_53:
-    name: Bluetooth Proxy (IDF v5.3)
+  build_idf53_basic:
+    name: Basic (IDF v5.3)
+    needs: build_idf53_core
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@main
-      - name: Build core
+      - name: Build Basic (IDF v5.3)
         uses: esphome/build-action@main
         with:
-          yaml-file: ".test/esphome_idf53_bluetooth_proxy.yaml"
+          yaml-file: ".test/esphome_idf53_basic.yaml"
+          version: latest
+
+  build_ard_hw_relays:
+    name: HW Relays (Arduino)
+    needs: build_ard_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Relays (Arduino)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_ard_hw_relays.yaml"
+          version: latest
+
+  build_idf_hw_relays:
+    name: HW Relays (IDF)
+    needs: build_idf_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Relays (IDF)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf_hw_relays.yaml"
+          version: latest
+
+  build_idf53_hw_relays:
+    name: HW Relays (IDF v5.3)
+    needs: build_idf53_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Relays (IDF v5.3)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf53_hw_relays.yaml"
+          version: latest
+
+  build_ard_hw_speaker:
+    name: HW Speaker (Arduino)
+    needs: build_ard_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Speaker (Arduino)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_ard_hw_speaker.yaml"
+          version: latest
+
+  build_idf_hw_speaker:
+    name: HW Speaker (IDF)
+    needs: build_idf_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Speaker (IDF)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf_hw_speaker.yaml"
+          version: latest
+
+  build_idf53_hw_speaker:
+    name: HW Speaker (IDF v5.3)
+    needs: build_idf53_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Speaker (IDF v5.3)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf53_hw_speaker.yaml"
+          version: latest
+
+  build_ard_hw_vibration:
+    name: HW Vibration (Arduino)
+    needs: build_ard_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Vibration (Arduino)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_ard_hw_vibration.yaml"
+          version: latest
+
+  build_idf_hw_vibration:
+    name: HW Vibration (IDF)
+    needs: build_idf_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Vibration (IDF)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf_hw_vibration.yaml"
+          version: latest
+
+  build_idf53_hw_vibration:
+    name: HW Vibration (IDF v5.3)
+    needs: build_idf53_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Vibration (IDF v5.3)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf53_hw_vibration.yaml"
+          version: latest
+
+  build_ard_ble_proxy:
+    name: Bluetooth Proxy (Ard)
+    needs: build_ard_basic
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build BLE Proxy (Ard)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_ard_ble_proxy.yaml"
+          version: latest
+
+  build_idf_ble_proxy:
+    name: Bluetooth Proxy (IDF)
+    needs: build_idf_basic
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build BLE Proxy (IDF)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf_ble_proxy.yaml"
+          version: latest
+
+  build_idf53_ble_proxy:
+    name: Bluetooth Proxy (IDF v5.3)
+    needs: build_idf53_basic
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build BLE Proxy (IDF v5.3)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf53_ble_proxy.yaml"
+          version: latest
+
+  build_ard_media_player:
+    name: Media Player (Ard)
+    needs:
+      - build_ard_basic
+      - build_ard_hw_relays
+      - build_ard_hw_vibration
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build Media Player (Ard)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_ard_media_player.yaml"
           version: latest
 ...

.github/workflows/validate_esphome_beta.yml

@@ -1,27 +1,29 @@
 ---
 name: Validate ESPHome (Beta)
 
+permissions:
+  contents: read
+  pull-requests: read
+
 on:  # yamllint disable-line rule:truthy
   push:
     paths:
-      - "*.yaml"
-      - "ESPHome/*.yaml"
-      - ".test/*.yaml"
-      - "*.h"
-      - "*.c"
-      - "*.cpp"
-      - "*.py"
+      - "*.{yml,yaml,h,cpp,c,py}"
+      - ".github/workflows/*.{yml,yaml,h,cpp,c,py}"
+      - ".test/*.{yml,yaml,h,cpp,c,py}"
+      - "components/*.{yml,yaml,h,cpp,c,py}"
+      - "components/tx_ultimate_easy/*.{yml,yaml,h,cpp,c,py}"
+      - "ESPHome/*.{yml,yaml,h,cpp,c,py}"
     branches:
       - main
   pull_request:
     paths:
-      - "*.yaml"
-      - "ESPHome/*.yaml"
-      - ".test/*.yaml"
-      - "*.h"
-      - "*.c"
-      - "*.cpp"
-      - "*.py"
+      - "*.{yml,yaml,h,cpp,c,py}"
+      - ".github/workflows/*.{yml,yaml,h,cpp,c,py}"
+      - ".test/*.{yml,yaml,h,cpp,c,py}"
+      - "components/*.{yml,yaml,h,cpp,c,py}"
+      - "components/tx_ultimate_easy/*.{yml,yaml,h,cpp,c,py}"
+      - "ESPHome/*.{yml,yaml,h,cpp,c,py}"
   workflow_dispatch:
 
 concurrency:
@@ -47,36 +49,234 @@ jobs:
       - name: Validate YAML files
         run: find . -name "*.yaml" -exec yamllint -c ./.rules/yamllint.yml {} +
 
-  build_basic:
-    name: Basic
+  build_ard_core:
+    name: Core (Arduino)
+    needs: code_scan
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@main
-      - name: Build core
+      - name: Build Core (Arduino)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_ard_core.yaml"
+          version: beta
+
+  build_idf_core:
+    name: Core (IDF)
+    needs: code_scan
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build Core (IDF)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf_core.yaml"
+          version: beta
+
+  build_idf53_core:
+    name: Core (IDF v5.3)
+    needs: code_scan
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build Core (IDF v5.3)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf53_core.yaml"
+          version: beta
+
+  build_ard_basic:
+    name: Basic (Arduino)
+    needs: build_ard_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build Basic (Arduino)
         uses: esphome/build-action@main
         with:
           yaml-file: ".test/esphome_ard_basic.yaml"
           version: beta
 
-  build_bluetooth_proxy_4:
-    name: Bluetooth Proxy (IDF)
+  build_idf_basic:
+    name: Basic (IDF)
+    needs: build_idf_core
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@main
-      - name: Build core
+      - name: Build Basic (IDF)
         uses: esphome/build-action@main
         with:
-          yaml-file: ".test/esphome_idf_bluetooth_proxy.yaml"
+          yaml-file: ".test/esphome_idf_basic.yaml"
           version: beta
 
-  build_bluetooth_proxy_53:
-    name: Bluetooth Proxy (IDF v5.3)
+  build_idf53_basic:
+    name: Basic (IDF v5.3)
+    needs: build_idf53_core
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@main
-      - name: Build core
+      - name: Build Basic (IDF v5.3)
         uses: esphome/build-action@main
         with:
-          yaml-file: ".test/esphome_idf53_bluetooth_proxy.yaml"
+          yaml-file: ".test/esphome_idf53_basic.yaml"
+          version: beta
+
+  build_ard_hw_relays:
+    name: HW Relays (Arduino)
+    needs: build_ard_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Relays (Arduino)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_ard_hw_relays.yaml"
+          version: beta
+
+  build_idf_hw_relays:
+    name: HW Relays (IDF)
+    needs: build_idf_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Relays (IDF)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf_hw_relays.yaml"
+          version: beta
+
+  build_idf53_hw_relays:
+    name: HW Relays (IDF v5.3)
+    needs: build_idf53_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Relays (IDF v5.3)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf53_hw_relays.yaml"
+          version: beta
+
+  build_ard_hw_speaker:
+    name: HW Speaker (Arduino)
+    needs: build_ard_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Speaker (Arduino)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_ard_hw_speaker.yaml"
+          version: beta
+
+  build_idf_hw_speaker:
+    name: HW Speaker (IDF)
+    needs: build_idf_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Speaker (IDF)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf_hw_speaker.yaml"
+          version: beta
+
+  build_idf53_hw_speaker:
+    name: HW Speaker (IDF v5.3)
+    needs: build_idf53_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Speaker (IDF v5.3)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf53_hw_speaker.yaml"
+          version: beta
+
+  build_ard_hw_vibration:
+    name: HW Vibration (Arduino)
+    needs: build_ard_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Vibration (Arduino)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_ard_hw_vibration.yaml"
+          version: beta
+
+  build_idf_hw_vibration:
+    name: HW Vibration (IDF)
+    needs: build_idf_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Vibration (IDF)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf_hw_vibration.yaml"
+          version: beta
+
+  build_idf53_hw_vibration:
+    name: HW Vibration (IDF v5.3)
+    needs: build_idf53_core
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build HW Vibration (IDF v5.3)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf53_hw_vibration.yaml"
+          version: beta
+
+  build_ard_ble_proxy:
+    name: Bluetooth Proxy (Ard)
+    needs: build_ard_basic
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build BLE Proxy (Ard)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_ard_ble_proxy.yaml"
+          version: beta
+
+  build_idf_ble_proxy:
+    name: Bluetooth Proxy (IDF)
+    needs: build_idf_basic
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build BLE Proxy (IDF)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf_ble_proxy.yaml"
+          version: beta
+
+  build_idf53_ble_proxy:
+    name: Bluetooth Proxy (IDF v5.3)
+    needs: build_idf53_basic
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build BLE Proxy (IDF v5.3)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_idf53_ble_proxy.yaml"
+          version: beta
+
+  build_ard_media_player:
+    name: Media Player (Ard)
+    needs:
+      - build_ard_basic
+      - build_ard_hw_relays
+      - build_ard_hw_vibration
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@main
+      - name: Build Media Player (Ard)
+        uses: esphome/build-action@main
+        with:
+          yaml-file: ".test/esphome_ard_media_player.yaml"
           version: beta
 ...

.test/esphome_ard_basic.yaml

@@ -1,8 +1,13 @@
 ---
 packages:
-  basic_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml  # Basic package
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml
 
 esp32:
   framework:
     type: arduino
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
 ...

.test/esphome_ard_ble_proxy.yaml

@@ -0,0 +1,14 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml
+  addon_bluetooth_proxy: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml
+
+esp32:
+  framework:
+    type: arduino
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_ard_core.yaml

@@ -0,0 +1,12 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+
+esp32:
+  framework:
+    type: arduino
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_ard_hw_relays.yaml

@@ -0,0 +1,13 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_hw_relays_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml
+
+esp32:
+  framework:
+    type: arduino
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_ard_hw_speaker.yaml

@@ -0,0 +1,13 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_hw_speaker_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_speaker.yaml
+
+esp32:
+  framework:
+    type: arduino
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_ard_hw_vibration.yaml

@@ -0,0 +1,13 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_hw_vibration_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml
+
+esp32:
+  framework:
+    type: arduino
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_ard_media_player.yaml

@@ -0,0 +1,15 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_hw_relays_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml
+  standard_hw_vibration_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml
+  addon_media_player: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_addon_media_player.yaml
+
+esp32:
+  framework:
+    type: arduino
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_idf53_basic.yaml

@@ -0,0 +1,15 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml
+
+esp32:
+  framework:
+    type: esp-idf
+    version: 5.3.1
+    platform_version: 6.9.0
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_idf53_ble_proxy.yaml

@@ -0,0 +1,16 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml
+  addon_bluetooth_proxy: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml
+
+esp32:
+  framework:
+    type: esp-idf
+    version: 5.3.1
+    platform_version: 6.9.0
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_idf53_core.yaml

@@ -1,11 +1,14 @@
 ---
 packages:
   core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
-  addon_bluetooth_proxy: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml
 
 esp32:
   framework:
     type: esp-idf
     version: 5.3.1
     platform_version: 6.9.0
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
 ...

.test/esphome_idf53_hw_relays.yaml

@@ -0,0 +1,15 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_hw_relays_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml
+
+esp32:
+  framework:
+    type: esp-idf
+    version: 5.3.1
+    platform_version: 6.9.0
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_idf53_hw_speaker.yaml

@@ -0,0 +1,15 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_hw_speaker_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_speaker.yaml
+
+esp32:
+  framework:
+    type: esp-idf
+    version: 5.3.1
+    platform_version: 6.9.0
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_idf53_hw_vibration.yaml

@@ -0,0 +1,15 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_hw_vibration_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml
+
+esp32:
+  framework:
+    type: esp-idf
+    version: 5.3.1
+    platform_version: 6.9.0
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_idf_basic.yaml

@@ -0,0 +1,13 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml
+
+esp32:
+  framework:
+    type: esp-idf
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_idf_ble_proxy.yaml

@@ -0,0 +1,14 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml
+  addon_bluetooth_proxy: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml
+
+esp32:
+  framework:
+    type: esp-idf
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_idf_bluetooth_proxy.yaml

@@ -1,5 +0,0 @@
----
-packages:
-  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
-  addon_bluetooth_proxy: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml
-...

.test/esphome_idf_core.yaml

@@ -0,0 +1,12 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+
+esp32:
+  framework:
+    type: esp-idf
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_idf_hw_relays.yaml

@@ -0,0 +1,13 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_hw_relays_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml
+
+esp32:
+  framework:
+    type: esp-idf
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_idf_hw_speaker.yaml

@@ -0,0 +1,13 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_hw_speaker_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_speaker.yaml
+
+esp32:
+  framework:
+    type: esp-idf
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

.test/esphome_idf_hw_vibration.yaml

@@ -0,0 +1,13 @@
+---
+packages:
+  core_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
+  standard_hw_vibration_package: !include ../ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml
+
+esp32:
+  framework:
+    type: esp-idf
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+...

ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml

@@ -11,97 +11,23 @@
 ##### - For normal system use, modifications to this file are NOT required.                    #####
 ####################################################################################################
 ---
-substitutions:
-  # RTTTL format: name:d=duration,o=octave,b=tempo:notes
-  # d=32 (32nd note), o=5 (octave 5), b=100 (tempo 100)
-  tone_volume_change: "scale_up:d=32,o=5,b=100:c,c#,d#,e,f#,g#,a#,b"  # Use "none" to disable sound
-
-api:
-  actions:
-    - action: rtttl_play
-      variables:
-        # The RTTTL string for the melody to be played.
-        # It should follow the RTTTL format, including the melody's name,
-        # default settings, and a sequence of notes.
-        tone: string
-      then:
-        - lambda: |-
-            rtttl_speaker->stop();
-            if (rtttl_speaker_gain->state > 0) {
-              ESP_LOGI("api", "Play tone: '%s'", tone.c_str());
-              rtttl_speaker->play(tone.c_str());
-            }
-
 bluetooth_proxy:
 
-esp32:
-  framework:
-    type: esp-idf
-    sdkconfig_options:
-      CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST: "y"
-      CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY: "y"
-      CONFIG_ESP32_REV_MIN_3: "y"
-      CONFIG_MBEDTLS_DYNAMIC_BUFFER: "y"
-      CONFIG_MBEDTLS_DYNAMIC_FREE_CA_CERT: "y"
-      CONFIG_MBEDTLS_DYNAMIC_FREE_CONFIG_DATA: "y"
-      CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC: "y"
-      CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY: "y"
-      CONFIG_SPIRAM_RODATA: "y"
-      CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP: "y"
-
 esphome:
   platformio_options:
     build_flags:
       - -D TX_ULTIMATE_EASY_ADDON_BLE_PROXY
 
-light:
-  - id: !extend light_full
-    platform: esp32_rmt_led_strip
-    rgb_order: GRB
-    rmt_channel: 1
-    chipset: ws2812
-    type: !remove
-    variant: !remove
-    max_refresh_rate: 33ms
-    use_psram: true
+script:
+  - id: !extend dump_config_list_packages
+    then:
+      - script.wait: dump_config
+      - lambda: |-
+          // Check for requirements
+          #if !defined(TX_ULTIMATE_EASY_CORE)
+            #error "The package TX-Ultimate-Easy-ESPHome_core.yaml is required."
+          #endif
 
-media_player: !remove
-
-number:
-  - id: rtttl_speaker_gain
-    name: Sound - Volume
-    platform: template
-    max_value: 100
-    min_value: 0
-    step: 1
-    initial_value: 100
-    unit_of_measurement: "%"
-    internal: false
-    disabled_by_default: true
-    entity_category: config
-    device_class: sound_pressure
-    restore_value: true
-    optimistic: true
-    set_action:
-      then:
-        - lambda: |-
-            rtttl_speaker->set_gain((100-(x/10.0f))/100.0f);
-            std::string tone_volume_change = "${tone_volume_change}";
-            // Play sound if tone_volume_change is not "none"
-            if (x > 0 and !tone_volume_change.empty() and tone_volume_change != "none")
-              rtttl_speaker->play(tone_volume_change);
-            rtttl_speaker->dump_config();
-
-rtttl:
-  - id: rtttl_speaker
-    speaker: mp_speaker
-
-speaker:
-  - id: mp_speaker
-    platform: i2s_audio
-    dac_type: external
-    i2s_dout_pin: GPIO15
-    i2s_audio_id: if_i2s_audio
-    i2s_comm_fmt: stand_msb
-    channel: mono
+          // Identify itself
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Add-on - BLE Proxy");
 ...

ESPHome/TX-Ultimate-Easy-ESPHome_addon_media_player.yaml

@@ -0,0 +1,68 @@
+####################################################################################################
+#####                              TX Ultimate Easy for ESPHome                                #####
+#####                  Repository: https://github.com/edwardtfn/TX-Ultimate-Easy               #####
+####################################################################################################
+##### Purpose: ESPHome - Add-on - Media player                                                 #####
+####################################################################################################
+##### Author: edwardtfn - https://github.com/edwardtfn - https://buymeacoffee.com/edwardfirmo  #####
+####################################################################################################
+##### NOTE:                                                                                    #####
+##### - Make changes ONLY if absolutely necessary and you have the required knowledge.         #####
+##### - For normal system use, modifications to this file are NOT required.                    #####
+####################################################################################################
+---
+packages:
+  standard_hw_audio: !include TX-Ultimate-Easy-ESPHome_standard_hw_audio.yaml
+
+esp32:
+  framework:
+    type: arduino
+
+esphome:
+  platformio_options:
+    build_flags:
+      - -D TX_ULTIMATE_EASY_ADDON_MEDIA_PLAYER
+
+media_player:
+  - id: mp_media_player
+    name: Media Player
+    internal: false
+    platform: i2s_audio
+    i2s_dout_pin: GPIO15
+    i2s_audio_id: if_i2s_audio
+    i2s_comm_fmt: msb
+    dac_type: external
+    mode: mono
+    mute_pin:
+      number: GPIO26
+      inverted: true
+      allow_other_uses: true
+
+script:
+  - id: !extend dump_config_list_packages
+    then:
+      - script.wait: dump_config
+      - lambda: |-
+          // Check for requirements
+          #if !defined(TX_ULTIMATE_EASY_CORE)
+            #error "The package TX-Ultimate-Easy-ESPHome_core.yaml is required."
+          #endif
+          #if !defined(TX_ULTIMATE_EASY_STANDARD_HW_AUDIO)
+            #error "The package TX-Ultimate-Easy-ESPHome_standard_hw_audio.yaml is required."
+          #endif
+
+          // Identify itself
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Add-on - Media Player");
+
+switch:
+  - id: sw_speaker_amplifier
+    name: Speaker - Amplifier
+    platform: gpio
+    pin:
+      number: GPIO26
+      inverted: true
+      allow_other_uses: true
+    restore_mode: RESTORE_DEFAULT_ON
+    internal: true
+    entity_category: config
+...

ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml

@@ -25,20 +25,20 @@ substitutions:
   TX_MODEL_3_GANG_TEXT: "3 Gang"
   TX_MODEL_4_GANG_TEXT: "4 Gang"
 
+  DUMP_CONFIG_CALLER_DELAY: 10s  # Delay to dump config after requested
+
 packages:
   # yamllint disable rule:colons
-  core_hw_buttons:   !include TX-Ultimate-Easy-ESPHome_core_hw_buttons.yaml
-  core_hw_leds:      !include TX-Ultimate-Easy-ESPHome_core_hw_leds.yaml
-  core_hw_relays:    !include TX-Ultimate-Easy-ESPHome_core_hw_relays.yaml
-  core_hw_speaker:   !include TX-Ultimate-Easy-ESPHome_core_hw_speaker.yaml
-  core_hw_touch:     !include TX-Ultimate-Easy-ESPHome_core_hw_touch.yaml
-  core_hw_vibration: !include TX-Ultimate-Easy-ESPHome_core_hw_vibration.yaml
+  core_hw_buttons: !include TX-Ultimate-Easy-ESPHome_core_hw_buttons.yaml
+  core_hw_leds:    !include TX-Ultimate-Easy-ESPHome_core_hw_leds.yaml
+  core_hw_touch:   !include TX-Ultimate-Easy-ESPHome_core_hw_touch.yaml
   # yamllint enable rule:colons
 
 api:
   id: api_server
   on_client_connected:
     then:
+      - script.execute: dump_config_caller
       - script.execute: publish_device_info
 
 binary_sensor:
@@ -49,24 +49,28 @@ binary_sensor:
     platform: template
     entity_category: diagnostic
     device_class: problem
-
-button:
-  - id: bt_restart
-    name: Restart
-    internal: false
-    platform: restart
-
-captive_portal:
-  id: ap_captive_portal
+    on_state:
+      then:
+        - lambda: |-
+            if (x)
+              ESP_LOGW("core", "Pending restart: YES");
+            else
+              ESP_LOGCONFIG("core", "Pending restart: No");
+        - script.execute: dump_config_caller
 
 esp32:
-  board: esp32dev
+  board: esp32dev  # adafruit_feather_esp32_v2  # esp32dev
   flash_size: 8MB
+  framework:
+    type: esp-idf
 
 esphome:
   name: ${name}
   friendly_name: ${friendly_name}
   comment: TX Ultimate Easy
+  project:
+    name: "edwardtfn.tx_ultimate_easy"
+    version: ${version}
   platformio_options:
     build_flags:
       - -D TX_ULTIMATE_EASY_CORE
@@ -95,8 +99,11 @@ globals:
     restore_value: true
     initial_value: '0'
 
-improv_serial:
-  id: serial_improv
+  - id: gang_count_plural_suffix
+    type: std::string
+    restore_value: true
+    max_restore_data_length: 3
+    # initial_value: "''"
 
 logger:
   level: DEBUG
@@ -149,6 +156,7 @@ script:
           if (id(gang_count) < 1 || id(gang_count) > 4) {
             ESP_LOGE("core_hw_leds", "Invalid number of gangs: %" PRIu8, id(gang_count));
           }
+          id(gang_count_plural_suffix) = id(gang_count) > 1 ? "s" : "";
 
   - id: boot_sequence
     mode: restart
@@ -158,6 +166,65 @@ script:
           id: bs_pending_restart
           state: false
 
+  - id: dump_config
+    mode: restart
+    then:
+      # Extended by all modules
+      - lambda: |-
+          // Device identification
+          ESP_LOGCONFIG("core", "Device friendly name: ${friendly_name}");
+          ESP_LOGCONFIG("core", "Device name: ${name}");
+          ESP_LOGCONFIG("core", "Device name (HA): %s", tx_device_name->state.c_str());
+          ESP_LOGCONFIG("core", "Device hostname: %s", App.get_name().c_str());
+
+          dump_config_versions->execute();
+
+          // Framework detection
+          #ifdef USE_ARDUINO
+          ESP_LOGCONFIG("core", "Framework: Arduino");
+          #elif defined(USE_ESP_IDF)
+          ESP_LOGCONFIG("core", "Framework: ESP-IDF");
+          #else
+          ESP_LOGW("core", "Framework: UNKNOWN");
+          #endif
+
+          // Model configuration
+          ESP_LOGCONFIG("core", "Model format (selected): %s", sl_tx_model_format->state.c_str());
+          ESP_LOGCONFIG("core", "Model format (detected): %s", id(is_us_model) ? "US" : "EU");
+          ESP_LOGCONFIG("core", "Gangs (selected): %s", sl_tx_model_gang->state.c_str());
+          ESP_LOGCONFIG("core", "Gangs (detected): %" PRIu8 "-Gang%s", id(gang_count), id(gang_count_plural_suffix).c_str());
+
+          // System state
+          if (bs_pending_restart->state)
+            ESP_LOGW("core", "Pending restart: YES");
+          else
+            ESP_LOGCONFIG("core", "Pending restart: No");
+
+  - id: dump_config_caller
+    mode: restart
+    then:
+      - delay: ${DUMP_CONFIG_CALLER_DELAY}
+      - script.execute: dump_config
+      - script.wait: dump_config
+      - script.execute: dump_config_list_packages
+
+  - id: dump_config_list_packages
+    mode: restart
+    then:
+      - script.wait: dump_config
+      - lambda: |-
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "Installed packages:");
+
+          // Identify itself
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Core");
+
+  - id: dump_config_versions
+    mode: restart
+    then:
+      - lambda: |-
+          // Version information
+          ESP_LOGCONFIG("core", "TX Ultimate firmware version: ${version}");
+
   - id: publish_device_info
     mode: restart
     then:
@@ -214,12 +281,6 @@ select:
             tx_ultimate->set_gang_count(id(gang_count));
 
 text_sensor:
-  - id: esphome_fw_version
-    name: ESPHome Version
-    platform: version
-    entity_category: diagnostic
-    internal: false
-
   - id: tx_fw_version
     name: TX Ultimate Easy Firmware Version
     platform: template
@@ -256,13 +317,6 @@ text_sensor:
           }
           return result;
 
-time:
-  - id: time_source
-    platform: homeassistant
-
-web_server:
-
 wifi:
   id: wifi_component
-  ap:
 ...

ESPHome/TX-Ultimate-Easy-ESPHome_core_hw_buttons.yaml

@@ -57,6 +57,11 @@ binary_sensor:
     internal: false
     <<: *binary_sensor_button_base
 
+esphome:
+  platformio_options:
+    build_flags:
+      - -D TX_ULTIMATE_EASY_CORE_HW_BUTTONS
+
 globals:
   - id: button_press_button
     type: uint8_t
@@ -200,6 +205,41 @@ script:
             }
           }
 
+  - id: !extend dump_config
+    then:
+      - lambda: |-
+          // Button's actions
+          ESP_LOGCONFIG("core_hw_buttons", "Button%s action%s:",
+                        id(gang_count_plural_suffix).c_str(),
+                        id(gang_count_plural_suffix).c_str());
+          ESP_LOGCONFIG("core_hw_buttons", "  Relay 1: %s", sl_button_1_action->has_state()
+                                                              ? sl_button_1_action->state.c_str()
+                                                              : "Unknown");
+          if (id(gang_count) >= 2)
+            ESP_LOGCONFIG("core_hw_buttons", "  Relay 2: %s", sl_button_2_action->has_state()
+                                                                ? sl_button_2_action->state.c_str()
+                                                                : "Unknown");
+          if (id(gang_count) >= 3)
+            ESP_LOGCONFIG("core_hw_buttons", "  Relay 3: %s", sl_button_3_action->has_state()
+                                                                ? sl_button_3_action->state.c_str()
+                                                                : "Unknown");
+          if (id(gang_count) >= 4)
+            ESP_LOGCONFIG("core_hw_buttons", "  Relay 4: %s", sl_button_4_action->has_state()
+                                                                ? sl_button_4_action->state.c_str()
+                                                                : "Unknown");
+
+  - id: !extend dump_config_list_packages
+    then:
+      - script.wait: dump_config
+      - lambda: |-
+          // Check for requirements
+          #if !defined(TX_ULTIMATE_EASY_CORE)
+            #error "The package TX-Ultimate-Easy-ESPHome_core.yaml is required."
+          #endif
+
+          // Identify itself
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Core - Hardware - Buttons");
+
   - id: !extend touch_on_multi_touch_release
     then:
       - script.execute: buttons_release

ESPHome/TX-Ultimate-Easy-ESPHome_core_hw_leds.yaml

@@ -29,6 +29,11 @@ substitutions:
   LIGHT_SIDES_RESTORE_MODE: RESTORE_DEFAULT_OFF
   LIGHT_INDIVIDUAL_RESTORE_MODE: RESTORE_DEFAULT_OFF
 
+esphome:
+  platformio_options:
+    build_flags:
+      - -D TX_ULTIMATE_EASY_CORE_HW_LEDS
+
 globals:
   - id: gb_lights_1
     type: std::vector<light::LightState*>
@@ -42,13 +47,15 @@ light:
   - id: light_full
     name: Light - All
     internal: true
-    platform: neopixelbus
-    type: GRB
-    variant: WS2811
-    # method: esp32_rmt
+    platform: esp32_rmt_led_strip
+    rgb_order: GRB
+    rmt_channel: 1
+    chipset: ws2812
     num_leds: 32
     pin: GPIO13
     restore_mode: ${LIGHT_FULL_RESTORE_MODE}
+    max_refresh_rate: 33ms
+    use_psram: true
 
   # Those lights are available based on the model selections
   - &light_partition_with_effects
@@ -436,52 +443,58 @@ script:
           light_us_right->set_internal(!id(is_us_model));
           light_us_top->set_internal(!id(is_us_model));
 
-          // LED Group Assignment:
-          // - For US model: gb_lights_1 = left side LEDs, gb_lights_2 = right side LEDs
-          // - For EU model: gb_lights_1 = bottom LEDs, gb_lights_2 = top LEDs
-          // Gang configurations determine which LED segments are active
-          switch (id(gang_count)) {
-            case 1:  // 1 Gang
-              if (id(is_us_model)) {
-                id(gb_lights_1) = { light_us_rl_1_1_left };
-                id(gb_lights_2) = { light_us_rl_1_1_right };
-              } else {
-                id(gb_lights_1) = { light_eu_rl_1_1_bottom };
-                id(gb_lights_2) = { light_eu_rl_1_1_top };
-              }
-              break;
-            case 2:  // 2 Gang
-              if (id(is_us_model)) {
-                id(gb_lights_1) = { light_us_rl_1_2_left, light_us_rl_2_2_left };
-                id(gb_lights_2) = { light_us_rl_1_2_right, light_us_rl_2_2_right };
-              } else {
-                id(gb_lights_1) = { light_eu_rl_1_2_bottom, light_eu_rl_2_2_bottom };
-                id(gb_lights_2) = { light_eu_rl_1_2_top, light_eu_rl_2_2_top };
-              }
-              break;
-            case 3:  // 3 Gang
-              if (id(is_us_model)) {
-                id(gb_lights_1) = { light_us_rl_1_3_left, light_us_rl_2_3_left, light_us_rl_3_3_left };
-                id(gb_lights_2) = { light_us_rl_1_3_right, light_us_rl_2_3_right, light_us_rl_3_3_right };
-              } else {
-                id(gb_lights_1) = { light_eu_rl_1_3_bottom, light_eu_rl_2_3_bottom, light_eu_rl_3_3_bottom };
-                id(gb_lights_2) = { light_eu_rl_1_3_top, light_eu_rl_2_3_top, light_eu_rl_3_3_top };
-              }
-              break;
-            case 4:  // 4 Gang
-              if (id(is_us_model)) {
-                id(gb_lights_1) = { light_us_rl_1_4_left, light_us_rl_2_4_left,
-                                    light_us_rl_3_4_left, light_us_rl_4_4_left };
-                id(gb_lights_2) = { light_us_rl_1_4_right, light_us_rl_2_4_right,
-                                    light_us_rl_3_4_right, light_us_rl_4_4_right };
-              } else {
-                id(gb_lights_1) = { light_eu_rl_1_4_bottom, light_eu_rl_2_4_bottom,
-                                    light_eu_rl_3_4_bottom, light_eu_rl_4_4_bottom };
-                id(gb_lights_2) = { light_eu_rl_1_4_top, light_eu_rl_2_4_top,
-                                    light_eu_rl_3_4_top, light_eu_rl_4_4_top };
-              }
-              break;
-          }
+  - id: !extend dump_config
+    then:
+      - lambda: |-
+          // Relay's LEDs modes
+          ESP_LOGCONFIG("core_hw_leds", "Relay%s LEDs mode%s:",
+                        id(gang_count_plural_suffix).c_str(),
+                        id(gang_count_plural_suffix).c_str());
+          ESP_LOGCONFIG("core_hw_leds", "  Relay 1: %s", id(is_us_model)
+                                                          ? sl_relay_1_light_mode_us->state.c_str()
+                                                          : sl_relay_1_light_mode_eu->state.c_str());
+          if (id(gang_count) >= 2)
+            ESP_LOGCONFIG("core_hw_leds", "  Relay 2: %s", id(is_us_model)
+                                                            ? sl_relay_2_light_mode_us->state.c_str()
+                                                            : sl_relay_2_light_mode_eu->state.c_str());
+          if (id(gang_count) >= 3)
+            ESP_LOGCONFIG("core_hw_leds", "  Relay 3: %s", id(is_us_model)
+                                                            ? sl_relay_3_light_mode_us->state.c_str()
+                                                            : sl_relay_3_light_mode_eu->state.c_str());
+          if (id(gang_count) >= 4)
+            ESP_LOGCONFIG("core_hw_leds", "  Relay 4: %s", id(is_us_model)
+                                                            ? sl_relay_4_light_mode_us->state.c_str()
+                                                            : sl_relay_4_light_mode_eu->state.c_str());
+
+          // Transition times
+          ESP_LOGCONFIG("core_hw_leds", "Transition times:");
+          ESP_LOGCONFIG("core_hw_leds", "  Default:     ${default_transition_length}");
+          if (${LIGHT_TRANSITION_TURN_ON} > 0)
+            ESP_LOGCONFIG("core_hw_leds", "  Turning on:  ${LIGHT_TRANSITION_TURN_ON}ms");
+          else
+            ESP_LOGCONFIG("core_hw_leds", "  Turning on:  Disabled");
+          if (${LIGHT_TRANSITION_TURN_OFF} > 0)
+            ESP_LOGCONFIG("core_hw_leds", "  Turning off: ${LIGHT_TRANSITION_TURN_OFF}ms");
+          else
+            ESP_LOGCONFIG("core_hw_leds", "  Turning off: Disabled");
+
+          // Restore modes
+          ESP_LOGCONFIG("core_hw_leds", "LED restore modes:");
+          ESP_LOGCONFIG("core_hw_leds", "  Light - All: ${LIGHT_FULL_RESTORE_MODE}");
+          ESP_LOGCONFIG("core_hw_leds", "  Sides:       ${LIGHT_SIDES_RESTORE_MODE}");
+          ESP_LOGCONFIG("core_hw_leds", "  Individual:  ${LIGHT_INDIVIDUAL_RESTORE_MODE}");
+
+  - id: !extend dump_config_list_packages
+    then:
+      - script.wait: dump_config
+      - lambda: |-
+          // Check for requirements
+          #if !defined(TX_ULTIMATE_EASY_CORE)
+            #error "The package TX-Ultimate-Easy-ESPHome_core.yaml is required."
+          #endif
+
+          // Identify itself
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Core - Hardware - LEDs");
 
   - id: light_set_state
     mode: parallel
@@ -571,15 +584,12 @@ select:
     entity_category: config
     disabled_by_default: false
     icon: mdi:dots-square
-
   - id: sl_relay_2_light_mode_eu
     name: Relay 2 light mode
     <<: *relay_light_mode_eu
-
   - id: sl_relay_3_light_mode_eu
     name: Relay 3 light mode
     <<: *relay_light_mode_eu
-
   - id: sl_relay_4_light_mode_eu
     name: Relay 4 light mode
     <<: *relay_light_mode_eu
@@ -601,15 +611,12 @@ select:
     entity_category: config
     disabled_by_default: false
     icon: mdi:dots-square
-
   - id: sl_relay_2_light_mode_us
     name: Relay 2 light mode
     <<: *relay_light_mode_us
-
   - id: sl_relay_3_light_mode_us
     name: Relay 3 light mode
     <<: *relay_light_mode_us
-
   - id: sl_relay_4_light_mode_us
     name: Relay 4 light mode
     <<: *relay_light_mode_us

ESPHome/TX-Ultimate-Easy-ESPHome_core_hw_touch.yaml

@@ -198,6 +198,11 @@ binary_sensor:
             id: bs_swipe_down
             state: OFF  # yamllint disable-line rule:truthy
 
+esphome:
+  platformio_options:
+    build_flags:
+      - -D TX_ULTIMATE_EASY_CORE_HW_TOUCH
+
 external_components:
   - source:
       type: git
@@ -283,6 +288,28 @@ script:
           bs_button_3_long_press_event->set_internal(id(gang_count) < 3);
           bs_button_4_long_press_event->set_internal(id(gang_count) < 4);
 
+  - id: !extend dump_config
+    then:
+      - lambda: |-
+          // Touch panel's state
+          if (sw_touch_panel_power->state)
+            ESP_LOGCONFIG("core_hw_touch", "Touch panel - Power: On");
+          else
+            ESP_LOGW("core_hw_touch", "Touch panel - Power: OFF");
+          ESP_LOGCONFIG("core_hw_touch", "Touch event duration: %.0fms", nr_touch_duration->state);
+
+  - id: !extend dump_config_list_packages
+    then:
+      - script.wait: dump_config
+      - lambda: |-
+          // Check for requirements
+          #if !defined(TX_ULTIMATE_EASY_CORE)
+            #error "The package TX-Ultimate-Easy-ESPHome_core.yaml is required."
+          #endif
+
+          // Identify itself
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Core - Hardware - Touchpad");
+
   - id: touch_on_multi_touch_release
     mode: restart
     then:

ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml

@@ -0,0 +1,72 @@
+####################################################################################################
+#####                              TX Ultimate Easy for ESPHome                                #####
+#####                  Repository: https://github.com/edwardtfn/TX-Ultimate-Easy               #####
+####################################################################################################
+##### Purpose: ESPHome Standard (non-essential, but recommended packages)                      #####
+####################################################################################################
+##### Author: edwardtfn - https://github.com/edwardtfn - https://buymeacoffee.com/edwardfirmo  #####
+####################################################################################################
+##### NOTE:                                                                                    #####
+##### - Make changes ONLY if absolutely necessary and you have the required knowledge.         #####
+##### - For normal system use, modifications to this file are NOT required.                    #####
+####################################################################################################
+---
+packages:
+  # yamllint disable rule:colons
+  core_hw_relays:    !include TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml
+  core_hw_speaker:   !include TX-Ultimate-Easy-ESPHome_standard_hw_speaker.yaml
+  core_hw_vibration: !include TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml
+  # yamllint enable rule:colons
+
+button:
+  - id: bt_restart
+    name: Restart
+    internal: false
+    platform: restart
+
+captive_portal:
+  id: ap_captive_portal
+
+esphome:
+  platformio_options:
+    build_flags:
+      - -D TX_ULTIMATE_EASY_STANDARD
+
+script:
+  - id: !extend dump_config_list_packages
+    then:
+      - script.wait: dump_config
+      - lambda: |-
+          // Check for requirements
+          #if !defined(TX_ULTIMATE_EASY_CORE)
+            #error "The package TX-Ultimate-Easy-ESPHome_core.yaml is required."
+          #endif
+
+          // Identify itself
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Standard");
+
+  - id: !extend dump_config_versions
+    then:
+      - lambda: |-
+          // Version information
+          ESP_LOGCONFIG("standard", "ESPHome builder: %s", esphome_fw_version->state.c_str());
+
+improv_serial:
+  id: serial_improv
+
+text_sensor:
+  - id: esphome_fw_version
+    name: ESPHome Version
+    platform: version
+    entity_category: diagnostic
+    internal: false
+
+time:
+  - id: time_source
+    platform: homeassistant
+
+web_server:
+
+wifi:
+  ap:
+...

ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_audio.yaml

@@ -0,0 +1,36 @@
+####################################################################################################
+#####                              TX Ultimate Easy for ESPHome                                #####
+#####                  Repository: https://github.com/edwardtfn/TX-Ultimate-Easy               #####
+####################################################################################################
+##### Purpose: ESPHome - Standard - I2S Audio                                                  #####
+####################################################################################################
+##### Author: edwardtfn - https://github.com/edwardtfn - https://buymeacoffee.com/edwardfirmo  #####
+####################################################################################################
+##### NOTE:                                                                                    #####
+##### - Make changes ONLY if absolutely necessary and you have the required knowledge.         #####
+##### - For normal system use, modifications to this file are NOT required.                    #####
+####################################################################################################
+---
+esphome:
+  platformio_options:
+    build_flags:
+      - -D TX_ULTIMATE_EASY_STANDARD_HW_AUDIO
+
+i2s_audio:
+  id: if_i2s_audio
+  i2s_bclk_pin: GPIO2
+  i2s_lrclk_pin: GPIO4
+
+script:
+  - id: !extend dump_config_list_packages
+    then:
+      - script.wait: dump_config
+      - lambda: |-
+          // Check for requirements
+          #if !defined(TX_ULTIMATE_EASY_CORE)
+            #error "The package TX-Ultimate-Easy-ESPHome_core.yaml is required."
+          #endif
+
+          // Identify itself
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Standard - Hardware - Audio");
+...

ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml

@@ -2,7 +2,7 @@
 #####                              TX Ultimate Easy for ESPHome                                #####
 #####                  Repository: https://github.com/edwardtfn/TX-Ultimate-Easy               #####
 ####################################################################################################
-##### Purpose: ESPHome Core - Hardware - Relays                                                #####
+##### Purpose: ESPHome - Standard - Hardware - Relays                                          #####
 ####################################################################################################
 ##### Author: edwardtfn - https://github.com/edwardtfn - https://buymeacoffee.com/edwardfirmo  #####
 ####################################################################################################
@@ -19,12 +19,20 @@ substitutions:
   RELAY_RESTORE_MODE: RESTORE_DEFAULT_OFF
   LIGHT_RELAYS_RESTORE_MODE: RESTORE_DEFAULT_OFF
 
+esphome:
+  platformio_options:
+    build_flags:
+      - -D TX_ULTIMATE_EASY_STANDARD_HW_RELAYS
 
 globals:
   - id: boot_initialization_relays
     type: bool
     restore_value: false
     initial_value: 'false'
+  - id: boot_initialization_relays_group_assignments
+    type: bool
+    restore_value: false
+    initial_value: 'false'
   - id: boot_initialization_relays_light_modes
     type: bool
     restore_value: false
@@ -436,14 +444,17 @@ script:
   - id: boot_initialize_relays
     mode: restart
     then:
+      - script.execute: boot_initialize_relays_group_assignments
       - script.execute: boot_initialize_relays_light_modes
       - script.execute: boot_initialize_relays_relay_leds
       - script.execute: boot_initialize_relays_relay_modes
+      - script.wait: boot_initialize_relays_group_assignments
       - script.wait: boot_initialize_relays_light_modes
       - script.wait: boot_initialize_relays_relay_leds
       - script.wait: boot_initialize_relays_relay_modes
       - wait_until:
           condition:
+            - lambda: return id(boot_initialization_relays_group_assignments);
             - lambda: return id(boot_initialization_relays_light_modes);
             - lambda: return id(boot_initialization_relays_relay_leds);
             - lambda: return id(boot_initialization_relays_relay_modes);
@@ -451,6 +462,61 @@ script:
           id: boot_initialization_relays
           value: 'true'
 
+  - id: boot_initialize_relays_group_assignments
+    mode: restart
+    then:
+      - lambda: |-
+          // LED Group Assignment:
+          // - For US model: gb_lights_1 = left side LEDs, gb_lights_2 = right side LEDs
+          // - For EU model: gb_lights_1 = bottom LEDs, gb_lights_2 = top LEDs
+          // Gang configurations determine which LED segments are active
+          switch (id(gang_count)) {
+            case 1:  // 1 Gang
+              if (id(is_us_model)) {
+                id(gb_lights_1) = { light_us_rl_1_1_left };
+                id(gb_lights_2) = { light_us_rl_1_1_right };
+              } else {
+                id(gb_lights_1) = { light_eu_rl_1_1_bottom };
+                id(gb_lights_2) = { light_eu_rl_1_1_top };
+              }
+              break;
+            case 2:  // 2 Gang
+              if (id(is_us_model)) {
+                id(gb_lights_1) = { light_us_rl_1_2_left, light_us_rl_2_2_left };
+                id(gb_lights_2) = { light_us_rl_1_2_right, light_us_rl_2_2_right };
+              } else {
+                id(gb_lights_1) = { light_eu_rl_1_2_bottom, light_eu_rl_2_2_bottom };
+                id(gb_lights_2) = { light_eu_rl_1_2_top, light_eu_rl_2_2_top };
+              }
+              break;
+            case 3:  // 3 Gang
+              if (id(is_us_model)) {
+                id(gb_lights_1) = { light_us_rl_1_3_left, light_us_rl_2_3_left, light_us_rl_3_3_left };
+                id(gb_lights_2) = { light_us_rl_1_3_right, light_us_rl_2_3_right, light_us_rl_3_3_right };
+              } else {
+                id(gb_lights_1) = { light_eu_rl_1_3_bottom, light_eu_rl_2_3_bottom, light_eu_rl_3_3_bottom };
+                id(gb_lights_2) = { light_eu_rl_1_3_top, light_eu_rl_2_3_top, light_eu_rl_3_3_top };
+              }
+              break;
+            case 4:  // 4 Gang
+              if (id(is_us_model)) {
+                id(gb_lights_1) = { light_us_rl_1_4_left, light_us_rl_2_4_left,
+                                    light_us_rl_3_4_left, light_us_rl_4_4_left };
+                id(gb_lights_2) = { light_us_rl_1_4_right, light_us_rl_2_4_right,
+                                    light_us_rl_3_4_right, light_us_rl_4_4_right };
+              } else {
+                id(gb_lights_1) = { light_eu_rl_1_4_bottom, light_eu_rl_2_4_bottom,
+                                    light_eu_rl_3_4_bottom, light_eu_rl_4_4_bottom };
+                id(gb_lights_2) = { light_eu_rl_1_4_top, light_eu_rl_2_4_top,
+                                    light_eu_rl_3_4_top, light_eu_rl_4_4_top };
+              }
+              break;
+            default:
+              ESP_LOGE("standard_hw_relays", "Invalid gang count: %" PRIu8, id(gang_count));
+              break;
+          }
+          id(boot_initialization_relays_group_assignments) = true;
+
   - id: boot_initialize_relays_light_modes
     mode: restart
     then:
@@ -587,13 +653,13 @@ script:
           std::string select_state;
           bool toggle_relay = false;
           if (api_disconnected) {
-            ESP_LOGW("core_hw_relays", "Toggle relays:");
-            ESP_LOGW("core_hw_relays", "  API state: DISCONNECTED");
-            ESP_LOGW("core_hw_relays", "  Button:    %" PRIu8, button);
+            ESP_LOGW("standard_hw_relays", "Toggle relays:");
+            ESP_LOGW("standard_hw_relays", "  API state: DISCONNECTED");
+            ESP_LOGW("standard_hw_relays", "  Button:    %" PRIu8, button);
           } else {
-            ESP_LOGVV("core_hw_relays", "Toggle relays:");
-            ESP_LOGVV("core_hw_relays", "  API state: Connected");
-            ESP_LOGVV("core_hw_relays", "  Button:    %" PRIu8, button);
+            ESP_LOGVV("standard_hw_relays", "Toggle relays:");
+            ESP_LOGVV("standard_hw_relays", "  API state: Connected");
+            ESP_LOGVV("standard_hw_relays", "  Button:    %" PRIu8, button);
           }
           switch (button) {
             case ${BUTTON_1_ID}:
@@ -626,21 +692,84 @@ script:
               break;
           }
           if (toggle_relay) {
-            ESP_LOGI("core_hw_relays", "Toggle relay %" PRIu8 ": (%s)", button, select_state.c_str());
+            ESP_LOGI("standard_hw_relays", "Toggle relay %" PRIu8 ": (%s)", button, select_state.c_str());
           } else if (not select_state.empty()) {
-            ESP_LOGV("core_hw_relays", "Ignoring toggle for relay %" PRIu8 ": action is '%s'",
+            ESP_LOGV("standard_hw_relays", "Ignoring toggle for relay %" PRIu8 ": action is '%s'",
                                         button, select_state.c_str());
           } else {
-            ESP_LOGE("core_hw_relays", "No button action selected for button %" PRIu8, button);
+            ESP_LOGE("standard_hw_relays", "No button action selected for button %" PRIu8, button);
           }
 
+  - id: !extend dump_config
+    then:
+      - lambda: |-
+          // Relay's modes
+          ESP_LOGCONFIG("standard_hw_relays", "Relay%s mode%s:",
+                        id(gang_count_plural_suffix).c_str(),
+                        id(gang_count_plural_suffix).c_str());
+          ESP_LOGCONFIG("standard_hw_relays", "  Relay 1: %s", sl_relay_1_mode->has_state()
+                                                            ? sl_relay_1_mode->state.c_str()
+                                                            : "Unknown");
+          if (id(gang_count) >= 2)
+            ESP_LOGCONFIG("standard_hw_relays", "  Relay 2: %s", sl_relay_2_mode->has_state()
+                                                              ? sl_relay_2_mode->state.c_str()
+                                                              : "Unknown");
+          if (id(gang_count) >= 3)
+            ESP_LOGCONFIG("standard_hw_relays", "  Relay 3: %s", sl_relay_3_mode->has_state()
+                                                              ? sl_relay_3_mode->state.c_str()
+                                                              : "Unknown");
+          if (id(gang_count) >= 4)
+            ESP_LOGCONFIG("standard_hw_relays", "  Relay 4: %s", sl_relay_4_mode->has_state()
+                                                              ? sl_relay_4_mode->state.c_str()
+                                                              : "Unknown");
+
+          // Relay's states
+          ESP_LOGCONFIG("standard_hw_relays", "Relay%s state%s:",
+                        id(gang_count_plural_suffix).c_str(),
+                        id(gang_count_plural_suffix).c_str());
+          ESP_LOGCONFIG("standard_hw_relays", "  Relay 1: %s", sw_relay_1->state ? "ON" : "OFF");
+          if (id(gang_count) >= 2)
+            ESP_LOGCONFIG("standard_hw_relays", "  Relay 2: %s", sw_relay_2->state ? "ON" : "OFF");
+          if (id(gang_count) >= 3)
+            ESP_LOGCONFIG("standard_hw_relays", "  Relay 3: %s", sw_relay_3->state ? "ON" : "OFF");
+          if (id(gang_count) >= 4)
+            ESP_LOGCONFIG("standard_hw_relays", "  Relay 4: %s", sw_relay_4->state ? "ON" : "OFF");
+          ESP_LOGCONFIG("standard_hw_relays", "Expose Relay's LEDs to Home Assistant: %s",
+                        YESNO(sw_expose_relays_leds_to_ha->state));
+
+          // Boot initialization statuses
+          ESP_LOGCONFIG("standard_hw_relays", "Boot initialization flags:");
+          ESP_LOGCONFIG("standard_hw_relays", "  Overall:     %s", YESNO(id(boot_initialization_relays)));
+          ESP_LOGCONFIG("standard_hw_relays", "  Groups:      %s",
+                        YESNO(id(boot_initialization_relays_group_assignments)));
+          ESP_LOGCONFIG("standard_hw_relays", "  Light modes: %s", YESNO(id(boot_initialization_relays_light_modes)));
+          ESP_LOGCONFIG("standard_hw_relays", "  Relay modes: %s", YESNO(id(boot_initialization_relays_relay_modes)));
+          ESP_LOGCONFIG("standard_hw_relays", "  Status LEDs: %s", YESNO(id(boot_initialization_relays_relay_leds)));
+
+          // Substitutions
+          ESP_LOGCONFIG("standard_hw_relays", "Restore modes:");
+          ESP_LOGCONFIG("standard_hw_relays", "  Relays: ${RELAY_RESTORE_MODE}");
+          ESP_LOGCONFIG("standard_hw_relays", "  Status LEDs: ${LIGHT_RELAYS_RESTORE_MODE}");
+
+  - id: !extend dump_config_list_packages
+    then:
+      - script.wait: dump_config
+      - lambda: |-
+          // Check for requirements
+          #if !defined(TX_ULTIMATE_EASY_CORE)
+            #error "The package TX-Ultimate-Easy-ESPHome_core.yaml is required."
+          #endif
+
+          // Identify itself
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Standard - Hardware - Relays");
+
   - id: show_relay_status
     mode: restart
     then:
       - script.wait: boot_initialize_relays
       - lambda: |-
           if (not id(boot_initialization_relays)) {
-            ESP_LOGW("core_hw_relays", "Relays not initialized yet");
+            ESP_LOGW("standard_hw_relays", "Relays not initialized yet");
             if (not boot_initialize_relays->is_running())
               boot_initialize_relays->execute();
             return;
@@ -683,8 +812,8 @@ script:
                 break;
             }
 
-            ESP_LOGV("core_hw_relays", "Relay %" PRIu8 " is %s", i + 1, relay_state ? "ON" : "OFF");
-            ESP_LOGV("core_hw_relays", "Light Mode for Relay %" PRIu8 ": %s", i + 1, light_mode.c_str());
+            ESP_LOGV("standard_hw_relays", "Relay %" PRIu8 " is %s", i + 1, relay_state ? "ON" : "OFF");
+            ESP_LOGV("standard_hw_relays", "Light Mode for Relay %" PRIu8 ": %s", i + 1, light_mode.c_str());
 
             // Use light_set_state for light updates
             if (relay_state) {

ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_speaker.yaml

@@ -0,0 +1,182 @@
+####################################################################################################
+#####                              TX Ultimate Easy for ESPHome                                #####
+#####                  Repository: https://github.com/edwardtfn/TX-Ultimate-Easy               #####
+####################################################################################################
+##### Purpose: ESPHome - Standard - Hardware - Speaker                                         #####
+####################################################################################################
+##### Author: edwardtfn - https://github.com/edwardtfn - https://buymeacoffee.com/edwardfirmo  #####
+####################################################################################################
+##### NOTE:                                                                                    #####
+##### - Make changes ONLY if absolutely necessary and you have the required knowledge.         #####
+##### - For normal system use, modifications to this file are NOT required.                    #####
+####################################################################################################
+---
+substitutions:
+  # RTTTL format: name:d=duration,o=octave,b=tempo:notes
+  # d=32 (32nd note), o=5 (octave 5), b=100 (tempo 100)
+  tone_volume_change: "scale_up:d=32,o=5,b=100:c,c#,d#,e,f#,g#,a#,b"  # Use "none" to disable sound
+
+packages:
+  standard_hw_audio: !include TX-Ultimate-Easy-ESPHome_standard_hw_audio.yaml
+
+api:
+  actions:
+    - action: rtttl_play
+      variables:
+        # The RTTTL string for the melody to be played.
+        # It should follow the RTTTL format, including the melody's name,
+        # default settings, and a sequence of notes.
+        tone: string
+      then:
+        - lambda: |-
+            rtttl_speaker->stop();
+            if (speaker_volume->state > 0) {
+              ESP_LOGI("standard_speaker", "Play tone: '%s'", tone.c_str());
+              rtttl_speaker->play(tone.c_str());
+            }
+
+esphome:
+  platformio_options:
+    build_flags:
+      - -D TX_ULTIMATE_EASY_STANDARD_SPEAKER
+
+number:
+  - id: speaker_volume
+    name: Sound - Volume
+    platform: template
+    max_value: 100
+    min_value: 0
+    step: 1
+    initial_value: 100
+    unit_of_measurement: "%"
+    internal: false
+    disabled_by_default: true
+    entity_category: config
+    device_class: sound_pressure
+    restore_value: true
+    optimistic: true
+    set_action:
+      then:
+        - speaker.volume_set:
+            id: speaker_embedded
+            volume: !lambda return x/100.0f;
+        - lambda: |-
+            static const std::string tone_volume_change = "${tone_volume_change}";
+            // Play sound if tone_volume_change is not "none"
+            if (x > 0 and !tone_volume_change.empty() and tone_volume_change != "none")
+              rtttl_speaker->play(tone_volume_change);
+
+rtttl:
+  - id: rtttl_speaker
+    speaker: speaker_embedded
+
+script:
+  - id: !extend dump_config_list_packages
+    then:
+      - script.wait: dump_config
+      - lambda: |-
+          // Check for requirements
+          #if !defined(TX_ULTIMATE_EASY_CORE)
+            #error "The package TX-Ultimate-Easy-ESPHome_core.yaml is required."
+          #endif
+          #if !defined(TX_ULTIMATE_EASY_STANDARD_HW_AUDIO)
+            #error "The package TX-Ultimate-Easy-ESPHome_standard_hw_audio.yaml is required."
+          #endif
+
+          // Identify itself
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Standard - Hardware - Speaker");
+
+  - id: speaker_play_click
+    then:
+      - if:
+          condition:
+            not:
+              - speaker.is_playing: speaker_embedded
+          then:
+            - speaker.play:
+                id: speaker_embedded
+                data: [
+                  0x01, 0x02, 0x04, 0x06, 0x07, 0x08, 0x08, 0x06, 0x01, 0xFA, 0xF4,
+                  0xEF, 0xEE, 0xF1, 0xF7, 0xFF, 0x07, 0x0E, 0x11, 0x11, 0x10, 0x0C,
+                  0x06, 0xFF, 0xF8, 0xF1, 0xEC, 0xEA, 0xEC, 0xF2, 0xF9, 0xFF, 0x05,
+                  0x0A, 0x10, 0x14, 0x17, 0x17, 0x14, 0x0B, 0xFD, 0xED, 0xE0, 0xD9,
+                  0xDB, 0xE6, 0xF7, 0x0A, 0x19, 0x20, 0x1E, 0x14, 0x05, 0xF4, 0xE5,
+                  0xDF, 0xE4, 0xF4, 0x0C, 0x24, 0x36, 0x3D, 0x35, 0x20, 0xFF, 0xDD,
+                  0xC0, 0xAE, 0xA9, 0xB0, 0xC4, 0xE0, 0x03, 0x26, 0x48, 0x62, 0x70,
+                  0x6D, 0x59, 0x35, 0x08, 0xD8, 0xAC, 0x8D, 0x80, 0x85, 0x9C, 0xC1,
+                  0xF0, 0x21, 0x4E, 0x6F, 0x7F, 0x7A, 0x63, 0x3D, 0x0F, 0xE0, 0xB7,
+                  0x9B, 0x90, 0x96, 0xAC, 0xCE, 0xF6, 0x1D, 0x3C, 0x50, 0x55, 0x4D,
+                  0x3A, 0x20, 0x04, 0xEC, 0xD8, 0xCC, 0xC9, 0xCD, 0xD8, 0xE8, 0xF9,
+                  0x0A, 0x17, 0x1F, 0x20, 0x1C, 0x12, 0x07, 0xFC, 0xF2, 0xEC, 0xEB,
+                  0xED, 0xF3, 0xFA, 0x02, 0x0A, 0x10, 0x12, 0x12, 0x0E, 0x07, 0xFE,
+                  0xF5, 0xED, 0xEA, 0xEB, 0xEF, 0xF7, 0x00, 0x0A, 0x10, 0x13, 0x12,
+                  0x0F, 0x09, 0x02, 0xFB, 0xF5, 0xF3, 0xF2, 0xF3, 0xF6, 0xFB, 0xFF,
+                  0x03, 0x05, 0x07, 0x08, 0x07, 0x05, 0x03, 0x01, 0xFF, 0xFE, 0xFC,
+                  0xFB, 0xFB, 0xFC, 0xFC, 0xFD, 0xFE, 0xFF, 0x00, 0x01, 0x02, 0x02,
+                  0x01]
+
+            - wait_until:
+                condition:
+                  not:
+                    - speaker.is_playing: speaker_embedded
+            - speaker.stop: speaker_embedded
+
+  - id: !extend touch_on_multi_touch_release
+    then:
+      - script.execute: touch_on_multi_touch_release_speaker
+
+  - id: touch_on_multi_touch_release_speaker
+    mode: restart
+    then:
+      - lambda: |-
+          if (sl_touch_speaker_feedback->state != "Disabled")
+            speaker_play_click->execute();
+
+  - id: !extend touch_on_press
+    then:
+      - script.execute: touch_on_press_speaker
+
+  - id: touch_on_press_speaker
+    mode: restart
+    then:
+      - lambda: |-
+          if (sl_touch_speaker_feedback->state == "On press" or sl_touch_speaker_feedback->state == "Always")
+            speaker_play_click->execute();
+
+  - id: !extend touch_on_release
+    then:
+      - script.execute: touch_on_release_speaker
+
+  - id: touch_on_release_speaker
+    mode: restart
+    then:
+      - lambda: |-
+          if (sl_touch_speaker_feedback->state == "On release" or sl_touch_speaker_feedback->state == "Always")
+            speaker_play_click->execute();
+
+select:
+  - id: sl_touch_speaker_feedback
+    name: Touch - Speaker feedback
+    platform: template
+    options:
+      - "Disabled"
+      - "On press"
+      - "On release"
+      - "Always"
+    initial_option: "Disabled"
+    optimistic: true
+    restore_value: true
+    internal: false
+    entity_category: config
+    disabled_by_default: false
+    icon: mdi:vibrate
+
+speaker:
+  - id: speaker_embedded
+    platform: i2s_audio
+    dac_type: external
+    i2s_dout_pin: GPIO15
+    i2s_audio_id: if_i2s_audio
+    i2s_comm_fmt: stand_msb
+    channel: mono
+...

ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_vibration.yaml

@@ -2,7 +2,7 @@
 #####                              TX Ultimate Easy for ESPHome                                #####
 #####                  Repository: https://github.com/edwardtfn/TX-Ultimate-Easy               #####
 ####################################################################################################
-##### Purpose: ESPHome Core - Hardware - Vibration system                                      #####
+##### Purpose: ESPHome - Standard - Hardware - Vibration system                                #####
 ####################################################################################################
 ##### Author: edwardtfn - https://github.com/edwardtfn - https://buymeacoffee.com/edwardfirmo  #####
 ####################################################################################################
@@ -32,6 +32,11 @@ button:
       then:
         - script.execute: vibrate
 
+esphome:
+  platformio_options:
+    build_flags:
+      - -D TX_ULTIMATE_EASY_STANDARD_HW_VIBRATION
+
 number:
   - id: nr_vibrating_duration
     name: Vibrate duration
@@ -53,6 +58,33 @@ ota:
       - switch.turn_off: sw_vibration_motor
 
 script:
+  - id: !extend dump_config
+    then:
+      - lambda: |-
+          // Configuration
+          ESP_LOGCONFIG("standard_hw_vibration", "Touch - Vibration feedback: %s",
+                        sl_touch_vibration_feedback->state.c_str());
+          ESP_LOGCONFIG("standard_hw_vibration", "Vibrate duration: %.0fms", nr_vibrating_duration->state);
+          ESP_LOGCONFIG("standard_hw_vibration", "Vibrate max duration: ${vibration_max_duration}");
+
+          // State
+          if (bs_vibrating->state)
+            ESP_LOGW("standard_hw_vibration", "Vibrating now: YES");
+          else
+            ESP_LOGCONFIG("standard_hw_vibration", "Vibrating now: No");
+
+  - id: !extend dump_config_list_packages
+    then:
+      - script.wait: dump_config
+      - lambda: |-
+          // Check for requirements
+          #if !defined(TX_ULTIMATE_EASY_CORE)
+            #error "The package TX-Ultimate-Easy-ESPHome_core.yaml is required."
+          #endif
+
+          // Identify itself
+          ESP_LOGCONFIG(ESPHOME_PROJECT_NAME, "  - Standard - Hardware - Vibration");
+
   - id: !extend touch_on_multi_touch_release
     then:
       - script.execute: touch_on_multi_touch_release_vibration
@@ -133,5 +165,4 @@ switch:
         - binary_sensor.template.publish:
             id: bs_vibrating
             state: OFF  # yamllint disable-line rule:truthy
-
 ...

README.md

@@ -156,6 +156,7 @@ This project builds upon the work of several amazing projects and contributors:
 
 - [SmartHome yourself - SONOFF TX Ultimate for ESPHome](https://github.com/SmartHome-yourself/sonoff-tx-ultimate-for-esphome)
 - [Un loco y su tecnología - Sonoff TX Ultimate with ESPHome](https://www.youtube.com/watch?v=58v8oqSQgXQ)
+- @PxPert - [Sonoff TX Ultimate and Voice Assistant](https://community.home-assistant.io/t/sonoff-tx-ultimate-and-voice-assistant/682214?u=edwardtfn)
 
 Special thanks to all contributors and community members who help make this project better.
 

TX-Ultimate-Easy-ESPHome.yaml

@@ -19,6 +19,8 @@ packages:
     ref: latest  # Or you can specify a version, like `ref: v2024.12.6`
     refresh: 5min
     files:
-      - ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml
-      # - ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml  # Adds experimental BLE proxy support (limited)
+      - ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml                  # Core (essential) packages
+      - ESPHome/TX-Ultimate-Easy-ESPHome_standard.yaml              # Non-essential, but recommended packages
+      # - ESPHome/TX-Ultimate-Easy-ESPHome_addon_ble_proxy.yaml     # Adds BLE proxy support
+      # - ESPHome/TX-Ultimate-Easy-ESPHome_addon_media_player.yaml  # Adds experimental Media Player (limited)
 ...

components/tx_ultimate_easy/tx_ultimate_easy.cpp

@@ -2,6 +2,7 @@
 
 #include "esphome/core/log.h"
 #include "tx_ultimate_easy.h"
+#include <cinttypes>
 #include <string>
 
 namespace esphome {
@@ -68,9 +69,9 @@ namespace esphome {
             if (this->gang_count_ == 1)
                 return 1;
 
-            // Calculate button number
-            const uint8_t width = (TOUCH_MAX_POSITION + 1) / this->gang_count_;  // Width of each button region
-            if (width < 1 or width > this->gang_count_)  // Invalid width - and prevents division by zero
+            //Calculate button number Change to round up insted of truncate (integer division)
+            const uint8_t width = (TOUCH_MAX_POSITION + gang_count_) / this->gang_count_;  // Width of each button region
+            if (width < 1)  // Invalid width - and prevents division by zero removed "width > gang_count_" issue with 2 gang 
                 return 0;
             const uint8_t button = std::min(
                 static_cast<uint8_t>((position / width) + 1), // Convert position to button index

versioning/VERSION

@@ -1 +1 @@
-2024.12.18
+2024.12.22

versioning/VERSION_YAML

@@ -1 +1 @@
-version: 2024.12.18
+version: 2024.12.22