First draft

.gitignore

@@ -0,0 +1,2 @@
+*.cmd
+*.bat

ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml

@@ -0,0 +1,192 @@
+substitutions:
+  name: tx-ultimate
+  friendly_name: TX Ultimate
+
+  led_pin: GPIO13
+  status_led_pin: GPIO33
+
+  audio_sdata_pin: GPIO15
+
+api:
+
+binary_sensor:
+  - id: bs_vibrating
+    name: Vibrating
+    icon: mdi:vibrate
+    internal: false
+    platform: template
+    lambda: return sw_vibration_motor->state;
+
+# bluetooth_proxy:
+
+button:
+  - id: bt_restart
+    name: Restart
+    internal: false
+    platform: restart
+
+  - id: bt_vibrate
+    name: Vibrate
+    icon: mdi:vibrate
+    internal: false
+    platform: template
+    on_press: 
+      then:
+        - switch.turn_on: sw_vibration_motor
+        - delay: !lambda return nr_vibrating_duration->state;
+        - switch.turn_off: sw_vibration_motor
+
+captive_portal:
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+    sdkconfig_options:
+      CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST: "y"
+      CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY: "y"
+      CONFIG_ESP32_REV_MIN_3: "y"
+      CONFIG_MBEDTLS_DYNAMIC_BUFFER: "y"
+      CONFIG_MBEDTLS_DYNAMIC_FREE_CA_CERT: "y"
+      CONFIG_MBEDTLS_DYNAMIC_FREE_CONFIG_DATA: "y"
+      CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC: "y"
+      CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY: "y"
+      CONFIG_SPIRAM_RODATA: "y"
+      CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP: "y"
+
+esphome:
+  name: ${name}
+  friendly_name: ${friendly_name}
+  on_boot: 
+    - priority: 700
+      then:
+        - wait_until:
+            condition:
+              - lambda: return sl_tx_model_gang->active_index().has_value();
+        - lambda: |-
+            auto index = sl_tx_model_gang->active_index();
+            if (index.has_value()) {
+              sw_relay_1->set_internal(false);
+              sw_relay_2->set_internal(index.value() < 1);
+              sw_relay_3->set_internal(index.value() < 2);
+              sw_relay_4->set_internal(index.value() < 3);
+            }
+
+i2s_audio:
+  id: if_i2s_audio
+  i2s_lrclk_pin: GPIO4
+  i2s_bclk_pin: GPIO2
+
+logger:
+
+number:
+  - id: nr_vibrating_duration
+    name: Vibrate duration
+    icon: mdi:vibrate
+    unit_of_measurement: ms
+    mode: box
+    internal: false
+    platform: template
+    min_value: 10
+    max_value: 3000
+    step: 1
+    initial_value: 50
+    optimistic: true
+    restore_value: true
+
+ota:
+
+psram:
+
+select:
+  - id: sl_tx_model_gang
+    name: Model
+    platform: template
+    options:
+      - "1 Gang"
+      - "2 Gang"
+      - "3 Gang"
+      - "4 Gang"
+    initial_option: "1 Gang"
+    optimistic: true
+    restore_value: true
+    internal: false
+    entity_category: config
+    disabled_by_default: false
+    icon: mdi:dip-switch
+
+switch:
+  - id: sw_pa_power
+    name: PA - Power
+    platform: gpio
+    pin: GPIO26
+    restore_mode: ALWAYS_ON
+    internal: true
+
+  - id: sw_relay_1
+    name: Relay 1
+    platform: gpio
+    pin: GPIO18
+    restore_mode: RESTORE_DEFAULT_OFF
+    internal: false
+
+  - id: sw_relay_2
+    name: Relay 2
+    platform: gpio
+    pin: GPIO17
+    restore_mode: RESTORE_DEFAULT_OFF
+    internal: true
+
+  - id: sw_relay_3
+    name: Relay 3
+    platform: gpio
+    pin: GPIO27
+    restore_mode: RESTORE_DEFAULT_OFF
+    internal: true
+
+  - id: sw_relay_4
+    name: Relay 4
+    platform: gpio
+    pin: GPIO23
+    restore_mode: RESTORE_DEFAULT_OFF
+    internal: true
+
+  - id: sw_touch_panel_power
+    name: Touch panel - Power
+    platform: gpio
+    pin:
+      number: GPIO5
+      inverted: true
+    restore_mode: ALWAYS_ON
+    internal: true
+
+  - id: sw_vibration_motor
+    name: Vibration motor
+    platform: gpio
+    pin: GPIO21
+    restore_mode: ALWAYS_OFF
+    internal: true
+    on_turn_on:
+      then:
+        - lambda: bs_vibrating->publish_state(true);
+    on_turn_off:
+      then:
+        - lambda: bs_vibrating->publish_state(false);
+
+uart:
+  id: if_uart_touch
+  tx_pin: GPIO19
+  rx_pin: GPIO22
+  baud_rate: 115200
+  debug:
+    direction: BOTH #RX
+    dummy_receiver: false
+    after:
+      timeout: 2s
+      bytes: 2048
+    sequence:
+      #- lambda: UARTDebug::log_string(direction, bytes);
+      - lambda: UARTDebug::log_hex(direction, bytes, ' ');
+
+wifi:
+  ap:

README.md

@@ -1,2 +1,58 @@
 # TX-Ultimate-Easy
 ESPHome based custom firmware for Sonoff TX Ultimate. Easy to setup.
+
+# TX Ultimate Easy
+
+Welcome to TX Ultimate Easy! This project aims to provide custom firmware for Sonoff TX Ultimate devices based on ESPHome, making it easy for even the least tech-savvy users to configure and use. Our goal is to have all the configurations manageable directly through the Home Assistant UI or via blueprints, eliminating the need to edit YAML files manually.
+
+## Features
+
+- **Simple Setup:** Configure your Sonoff TX Ultimate through Home Assistant UI.
+- **No YAML Editing:** All settings are adjustable without touching YAML files after the initial setup.
+- **User-Friendly:** Designed for users of all technical levels.
+- **Customizable:** Flexibility to adapt the firmware to your needs.
+- **Seamless Integration:** Works flawlessly with Home Assistant.
+
+## Getting Started
+
+### Prerequisites
+
+- Sonoff TX Ultimate device
+- Home Assistant installed
+- ESPHome add-on installed in Home Assistant
+
+### Installation
+To be written.
+
+### Configuration
+
+- **Via Home Assistant UI:**
+  All device settings can be managed through the Home Assistant interface. No need to edit YAML files directly.
+
+- **Using Blueprints:**
+  Import and use blueprints to quickly configure your device for common use cases.
+
+## Documentation
+To be written.
+
+## Contributing
+
+We welcome contributions from the community. If you have ideas for new features, improvements, or bug fixes, please open an issue or submit a pull request.
+
+## License
+
+This project is licensed under the MIT License - see the [LICENSE](LICENSE) file for details.
+
+## Acknowledgments
+
+This project is highly inspired by these other projects:
+- [SmartHome yourself - SONOFF TX Ultimate for ESPHome (Custom Component)](https://github.com/SmartHome-yourself/sonoff-tx-ultimate-for-esphome)
+- [Un loco y su tecnología - Sonoff TX Ultimate with ESPHome | Absolute power](https://www.youtube.com/watch?v=58v8oqSQgXQ)
+
+Thanks a lot for sharing all your discoveries and ideas.
+
+## Support
+
+If you find this project helpful, consider supporting us through Buy Me a Coffee:
+
+[![Buy Me a Coffee](https://www.buymeacoffee.com/assets/img/custom_images/yellow_img.png)](https://www.buymeacoffee.com/edwardfirmo)

TX-Ultimate-Easy-ESPHome.yaml

@@ -0,0 +1,15 @@
+substitutions:
+  name: tx-ultimate-easy
+  friendly_name: TX Ultimate Easy
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+packages:
+  remote_package:
+    url: https://github.com/edwardtfn/TX-Ultimate-Easy
+    ref: dev
+    refresh: 30s
+    files:
+      - ESPHome/TX-Ultimate-Easy-ESPHome_core.yaml