Set min_version to ESPHome 2025.8.0

ESPHome/TX-Ultimate-Easy-ESPHome_core_common.yaml

@@ -71,6 +71,7 @@ esphome:
   name: ${name}
   friendly_name: ${friendly_name}
   comment: TX Ultimate Easy
+  min_version: 2025.8.0-dev
   project:
     name: "edwardtfn.tx_ultimate_easy"
     version: ${version}

ESPHome/TX-Ultimate-Easy-ESPHome_core_hw_leds.yaml

@@ -30,7 +30,7 @@ substitutions:
   LIGHT_INDIVIDUAL_RESTORE_MODE: RESTORE_DEFAULT_OFF
 
   LIGHT_ATTRS_DEFAULT: '0x64FFFFFF'                 # brightness=100, RGB=255,255,255
-  LIGHT_DUAL_ATTRS_DEFAULT: '0x64FFFFFF64FFFFFF'  # Both lights: brightness=100, RGB=255,255,255
+  LIGHT_DUAL_ATTRS_DEFAULT: '0x0064FFFFFF64FFFFFF'  # Both lights: brightness=100, RGB=255,255,255
 
   TAG_CORE_HW_LEDS: core.hw.leds
 
@@ -562,6 +562,14 @@ script:
       attr_global_ptr: uint32_t*
     then:
       - lambda: |-
+          if (!light_ptr) {
+            ESP_LOGE("${TAG_CORE_HW_LEDS}", "Invalid light pointer");
+            return;
+          }
+          if (!attr_global_ptr) {
+            ESP_LOGE("${TAG_CORE_HW_LEDS}", "Invalid attributes pointer");
+            return;
+          }
           auto current = light_ptr->current_values;
           tx_ultimate_easy::LightAttributes attrs = {
             .brightness = uint8_t(current.get_brightness() * 100.0f),
@@ -582,6 +590,14 @@ script:
       group_index: uint8_t  # 1 or 2 (which group within the dual pack)
     then:
       - lambda: |-
+          if (!light_ptr) {
+            ESP_LOGE("${TAG_CORE_HW_LEDS}", "Invalid light pointer");
+            return;
+          }
+          if (!attr_global_ptr) {
+            ESP_LOGE("${TAG_CORE_HW_LEDS}", "Invalid attributes pointer");
+            return;
+          }
           auto current = light_ptr->current_values;
           tx_ultimate_easy::LightAttributes new_attrs = {
             .brightness = uint8_t(current.get_brightness() * 100.0f),

ESPHome/TX-Ultimate-Easy-ESPHome_standard_hw_relays.yaml

@@ -16,7 +16,12 @@ substitutions:
   RELAY_MODE_TEXT_LIGHT: "Light"
   RELAY_MODE_TEXT_NOT_USED: "Not in use"
 
-  LIGHT_RELAYS_RESTORE_MODE: ALWAYS_OFF
+  # You shouldn't change the restore mode as there is a custom restoring engine based on globals.
+  # The reason of a custom engine is to address an issue where NVS space was exceeded causing saving/restoring issues
+  RELAYS_LIGHT_RESTORE_MODE: ALWAYS_OFF
+  RELAYS_LIGHT_PARTITION_RESTORE_MODE: ALWAYS_OFF
+  RELAYS_EXPOSE_LEDS_TO_HA_RESTORE_MODE: ALWAYS_OFF
+  RELAYS_SWITCH_RESTORE_MODE: ALWAYS_OFF
 
   TAG_STD_HW_RELAYS: std.hw.relays
 
@@ -25,11 +30,6 @@ esphome:
     build_flags:
       - -D TX_ULTIMATE_EASY_STANDARD_HW_RELAYS
 
-external_components:
-  - source: github://pr#10105  # To-do: remove after this PR is released
-    components: [switch]
-    refresh: 1h
-
 globals:
   - &global_attr_dual_light
     id: attr_light_rl_1_1_both  # 1-gang: relay 1, both groups
@@ -113,7 +113,7 @@ light:
     output: output_relay_1
     platform: binary
     internal: true
-    restore_mode: ${LIGHT_RELAYS_RESTORE_MODE}
+    restore_mode: ${RELAYS_LIGHT_RESTORE_MODE}
     on_turn_on:
       then:
         - if:
@@ -194,7 +194,7 @@ light:
     internal: true
     disabled_by_default: false
     default_transition_length: ${default_transition_length}
-    restore_mode: ALWAYS_OFF
+    restore_mode: ${RELAYS_LIGHT_PARTITION_RESTORE_MODE}
     segments:
       - id: light_full
         from: 9
@@ -1522,7 +1522,7 @@ switch:
   - id: sw_expose_relays_leds_to_ha
     name: Expose Relay's LEDs to Home Assistant
     platform: template
-    restore_mode: ALWAYS_OFF
+    restore_mode: ${RELAYS_EXPOSE_LEDS_TO_HA_RESTORE_MODE}
     optimistic: true
     internal: false
     entity_category: config
@@ -1545,7 +1545,7 @@ switch:
     name: Relay 1
     output: output_relay_1
     platform: output
-    restore_mode: ALWAYS_OFF
+    restore_mode: ${RELAYS_SWITCH_RESTORE_MODE}
     internal: true
     on_turn_on:
       then:
@@ -1571,7 +1571,7 @@ switch:
     name: Relay 2
     output: output_relay_2
     platform: output
-    restore_mode: ALWAYS_OFF
+    restore_mode: ${RELAYS_SWITCH_RESTORE_MODE}
     internal: true
     on_turn_on:
       then:
@@ -1597,7 +1597,7 @@ switch:
     name: Relay 3
     output: output_relay_3
     platform: output
-    restore_mode: ALWAYS_OFF
+    restore_mode: ${RELAYS_SWITCH_RESTORE_MODE}
     internal: true
     on_turn_on:
       then:
@@ -1623,7 +1623,7 @@ switch:
     name: Relay 4
     output: output_relay_4
     platform: output
-    restore_mode: ALWAYS_OFF
+    restore_mode: ${RELAYS_SWITCH_RESTORE_MODE}
     internal: true
     on_turn_on:
       then:

components/tx_ultimate_easy/tx_ultimate_easy_touch.cpp

@@ -74,8 +74,9 @@ namespace esphome {
             if (this->gang_count_ == 1)
                 return 1;
 
-            // Calculate button number Change to round up instead of truncate (integer division)
+            // Calculate button width (rounds up to ensure full coverage)
-            const uint8_t width = (TOUCH_MAX_POSITION + gang_count_) / this->gang_count_;  // Width of each button region
+            const uint8_t width =
+                (TOUCH_MAX_POSITION + this->gang_count_) / this->gang_count_;  // Width of each button region
             if (width < 1)  // Invalid width - and prevents division by zero 
                 return 0;
             const uint8_t button = std::min(